EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009A-320.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Performance DataSectional View
Ratings and Specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120° F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 45 L/min (12 USgpm)
Internal leakage, port 2 to port 1 less than 5 drops/min max @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-10-2
Fluids All general purpose hydraulics fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight including coil 0,4 kg (0.87 lbs)
Seal kit 565803 (Buna-N), 566086 (Viton
®
)
Viton is a registered trademark of E.I. DuPont
Operation
In the de-energized position
the valve allows free flow in
both directions.
When the solenoid is ener-
gized the pilot poppet closes
the orifice and the valve closes
blocking flow from port 2 to 1
while allowing free flow from
port 1 to 2.
Features
Hardened and ground work-
ing parts. Lapped seat for low
leakage. IP69K Tough coil com-
patibility. Continuously rated.
Compact design with low pres-
sure drop.
Description
This is a 2-way, 2-position,
poppet type, pilot operated,
normally open solenoid valve.
This valve is used in applications
requiring low leakage, such as
load holding applications or as
a general purpose diverter or
dump valve.
SV3-10-O/OP/OS - Solenoid Valve
Poppet type, normally open solenoid valve (free reverse flow)
45 L/min (12 USgpm) • 210 bar (3000 psi)
Pressure
Drop
Cartridge only
Port 1 to port 2 and port 2
to port 1 de-energized
2
1
0
50
75
100
25
Pressure Drop psi
6
5
2
4
3
1
7
Pressure Drop bar
302015105 35 40 45250
Flow - L/m in (21,8 cSt oil @ 49°C)
2 4 6 8 10 120
Flow - USgpm (105 SU S oil @ 120°F)
1
2
EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 A-321.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
1
2
2X 7.1
(0.28)
19.1 (0.75)
25.4
(1.00)
70.3
(2.77)
44.5
(1.75)
63.5
(2.50)
9.5
(0.37)
63.5 (2.50)
44.46 (1.750)
SV3-10-O/OP/OS - Solenoid Valve
Poppet type, normally open solenoid valve (free reverse flow)
45 L/min (12 USgpm) • 210 bar (3000 psi)
Model Code
1
Function
SV3 - Solenoid valve
2
Size
10 - 10 size
3
Seal Material
Blank - Buna-N
V - Viton
®
4
Style
O - Normally open
5
Manual Override Option
Blank - No manual override
P - Push type
S - Screw type
For valve dimensions with manual
override option installed see
page A-980.
6
Filter Option
Code Port Size Housing Number
0 Cartridge only
3B 3/8" BSPP 02-175462*
6T SAE 6 566151*
2G 1/4" BSPP 876702
3G 3/8" BSPP 876703
6H SAE 6 876700
8H SAE 8 876701
*Light duty housing.
See section J for housing details.
7
Port Size
9
Connector Types
Blank - No coil
G - ISO 4400 DIN 43650
Q - Spade terminals
W - Flying lead
N - Deutsch (DC only)
Y - Amp JR (DC only)
D - Metripack 150 male
(DC only)
J - Metripack 280 male
(DC only)
For coil part numbers and
dimensions see section C.
10
Special Features
00 - None
(Only required if valve has special
features, omitted if “00”.)
1 2 3 4 5 6 10
SV3 10 (V) O (*) (F)
8 9
**** *
7
** 00
8
Voltage Rating
00 - No coil
12D - 12VDC
24D - 24VDC
36D - 36VDC
24A - 24VAC
115A - 115VAC
230A - 230VAC
12B - 12VDC/w diode*
24A - 24VDC/w diode*
*Optional arc suppression diode.
Dimensions
mm (inch)
Torque cartridge in aluminum
housing 47-54 Nm (35-40 ft lbs)
Note: Use J series, 23 W
coils with this solenoid valve.
Note: When solenoid valve
is ordered as cartridge only,
coil nut is included.
Installation DrawingCartridge Only
WARNING
Maintain 5-8 Nm
(4-6 ft lbs) maximum
torque on valve tube nut.
Over tightening may cause
valve failure.
•
– – – – –
