EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009A-170.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 45 L/min (12 USgpm)
Internal leakage less than 5 drops/min, max @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-10-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight cartridge only 0,4 kg (0.87 lbs)
Seal kit 565803 (Buna-N), 566086 (Viton
®
)
Viton is a registered trademark of E.I. DuPont
SV3-10-C/CM/CR - Solenoid Valve
2-way, 2-position, normally closed, poppet type solenoid valve
45 L/min (12 USgpm) • 210 bar (3000 psi)
Description
This is a 2-way, 2-position,
poppet type, pilot operated,
normally closed solenoid valve.
This valve is used in applica-
tions requiring low leakage,
such as load holding applica-
tions or as a general purpose
diverter or dump valve.
Operation
In the de-energized position
the valve blocks flow from port
2 to 1 and free flow is allowed
from port 1 to 2.
When the solenoid is ener-
gized the pilot poppet is pulled
off the seat allowing the valve
to open in both directions.
Features
Hardened and ground work-
ing parts. Lapped seat for low
leakage. IP69K Tough coil com-
patibility. Continuously rated.
Compact design with low
pressure drop.
Performance DataSectional View
Pressure Drop Curves
Cartridge only
A - Port 1 to port 2 de-energized
B - Port 2 to port 1 energized
2
1
5
1
3
7
Pressure Drop - bar
A
B
25
50
75
100
Pressure D rop - psi
0
0 30252015105 35 40 45
Flow - L/m in (21,8 cSt oil @ 49°C)
0 2 4 6 8 10 12
Flow - USgpm (105 SU S oil @ 120°F)
2
1
EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 A-171.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
1
2
2X 7.1
(0.28)
19.1 (0.75)
25.4
(1.00)
57.1
(2.25)
44.5
(1.75)
63.5
(2.50)
9.5
(0.37)
63.5 (2.50)
44.46 (1.750)
Dimensions
mm (inch)
Torque cartridge in aluminum
housing 47-54 Nm (35-40 ft lbs)
Note: When solenoid valve is
ordered as cartridge only, coil
nut is included.
Note: Use J series, 23 W
coils with this solenoid valve.
SV3-10-C/CM/CR - Solenoid Valve
2-way, 2-position, normally closed, poppet type solenoid valve
45 L/min (12 USgpm) • 210 bar (3000 psi)
1
Function
SV3 - Solenoid valve
2
Size
10 - 10 size
3
Seal Material
Blank - Buna-N
V - Viton
®
4
Style
C - Normally closed
5
Manual Override Option
Blank - No manual override
M - Knob type
R - Cable type
For valve dimensions with
manual override option installed
see page A-980.
6
Filter Options
Blank - None
F - Filter screen
9
Connector Types
Blank - No coil
G - ISO 4400 DIN 43650
Q - Spade terminals
W - Flying lead
N - Deutsch (DC only)
Y - Amp JR (DC only)
D - Metripack 150 male
(DC only)
J - Metripack 280 male
(DC only)
For coil part numbers and dimensions
see section C.
10
Special Features
00 - None
(Only required if valve has special
features, omitted if “00.”)
Code Port Size Housing Number
0 Cartridge only
3B 3/8" BSPP 02-175462*
2G 1/4" BSPP 876702
3G 3/8" BSPP 876703
6T SAE 6 566151*
6H SAE 6 876700
8H SAE 8 876701
See section J for housing details.
*Light duty housing
7
Port Size
8
Voltage Rating
00 - No coil
12D - 12VDC
24D - 24VDC
36D - 36VDC
24A - 24VAC
115A - 115VAC
230A - 230VAC
12B - 12VDC/w diode*
24B - 24VDC/w diode*
*Optional arc suppression diode.
Model Code
2 3 4 5 6 8 9 101
SV3 10 (V) C (*) (F) **** * 00
7
**
Installation Drawing
Cartridge Only
– – – – –
WARNING
Maintain 5-8 Nm
(4-6 ft lbs) maximum
torque on valve tube nut.
Over tightening may cause
valve failure.
•
