EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009A-220.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
A - Port 2 to port 1 energized
B - Port 1 to port 2 de-energized
Ratings and Specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 132 L/min (35 USgpm)
Internal leakage, port 2 to port 1 less than 5 drops/min, max @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-16-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight including coil 1,15 kg (2.53 lbs)
Seal kit 565810 (Buna-N), 02-889609 (Viton
®
)
Viton is a registered trademark of E.I. DuPont
SV1-16-C/CM/CR - Solenoid Valve
2-way, 2-position, normally closed, poppet type solenoid valve
132 L/min (35 USgpm) • 210 bar (3000 psi)
Description
This is a 2-way, 2-position,
poppet type, pilot operated,
normally closed solenoid valve.
This valve is used in applica-
tions requiring low leakage,
such as load holding applica-
tions or as a general purpose
diverter or dump valve.
Operation
In the de-energized position
the valve blocks flow from port
2 to 1 and free flow is allowed
from port 1 to 2.
When the solenoid is ener-
gized the pilot poppet is pulled
off the seat allowing the valve
to open in both directions.
Features
Hardened and ground work-
ing parts. Lapped seat for low
leakage. IP69K Tough coil com-
patibility. Continuously rated.
Compact design with low
pressure drop.
Performance Data
Sectional View
Pressure Drop
Cartridge only
2
1
50
100
150
200
0
Pressure Drop - psi
13
11
9
7
5
3
1
Pressure Drop - bar
A
B
1200 40 8020 60 100
Flow - L/m in (21,8 cSt oil @ 49°C)
0 5 20 3025 3510 15
Flow - U Sgpm (105 SUS oil @ 120°F)
1
2
EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 A-221.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Dimensions
mm (inch)
Torque cartridge in
aluminum housing
108-122 Nm (80-90 ft lbs)
Note: When solenoid valve
is ordered as cartridge only,
coil nut is included.
Note: Use J series, 23 W
coils with this solenoid valve.
SV1-16-C/CM/CR - Solenoid Valve
2-way, 2-position, normally closed, poppet type solenoid valve
132 L/min (35 USgpm) • 210 bar (3000 psi)
1
Function
SV1 - Solenoid valve
2
Size
16 - 16 size
3
Seal Material
Blank - Buna-N
V - Viton
®
4
Style
C - Normally closed
5
Manual Override Option
Blank - No manual override
M - Knob type
R - Cable type
For valve dimensions with
manual override option installed
see page A-980.
8
Connector Types
Blank - No coil
G - ISO 4400 DIN 43650
Q - Spade terminals
W - Flying lead
N - Deutsch (DC only)
Y - Amp JR (DC only)
D - Metripack 150 male
(DC only)
J - Metripack 280 male
(DC only)
For coil part numbers and dimensions
see section C.
9
Special Features
00 - None
(Only required if valve has special
features, omitted if “00.”)
Installation Drawings
Code Port Size Housing Number
0 Cartridge only
6B 3/4" BSPP 02-175463*
12T SAE 12 566149*
6G 3/4" BSPP 876717
10H SAE 10 876717
12H SAE 12 566113
See section J for housing details.
*Light duty housing
6
Port Size
7
Voltage Rating
00 - No coil
12D - 12VDC
24D - 24VDC
36D - 36VDC
24A - 24VAC
115A - 115VAC
230A - 230VAC
12B - 12VDC/w diode*
24B - 24VDC/w diode*
*Optional arc suppression diode.
Model Code
2 3 4 5 6 7 8 91
SV1 16 (V) C (*) *** **** * 00
WARNING
Maintain 5-8 Nm
(4-6 ft lbs) maximum
torque on valve tube nut.
Over tightening may cause
valve failure.
•
Cartridge Only
–
–
–
– –
65.5
(2.58)
88.9
(3.50)
63.5
(2.50)
10.3
(0.41)
2X 8.74
(.344)
28.4
(1.12)
31.8
(1.25)
2
1
88.9 (3.50)
68.28 (2.688)
