EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009A-690.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 23 L/min (6 USgpm)
Internal leakage 164 cm
3
/min (10 in
3
/min) max @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-10-4
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight including coil 0,44 kg (0.96 lbs)
Seal kit 889625 (Buna-N), 566080 (Viton
®
)
Viton is a registered trademark of E.I. DuPont
SV1-10-4/4M/4R - Solenoid Valve
4-way, 2-position spool type solenoid valve
Up to 23 L/min (6 USgpm) • 210 bar (3000 psi)
Operation
In the de-energized position
this valve allows flow from
port 4 to port 1 and from port
3 to port 2.
In the energized position flow
is allowed from port 3 to port
4 and from port 2 to port 1
Features
Hardened, ground and honed
working parts to limit leakage.
IP69K Tough coil compatibility.
Continuously rated. Compact
design with low pressure drop.
Rated pressure on all ports..
Pressure Drop
Cartridge only
Performance Data
A - Port 4 to port 1
B - Port 3 to port 2
Description
This is a 4-way 2-position,
direct acting, spool type sole-
noid valve. This valve can be
used in applications where the
motion of a double acting cyl-
inder or a motor needs to be
reversed.
Sectional View
3
2
1
4
45
Pressure Drop - psi
75
15
0
60
30
90
A
B
2
4
6
1
3
5
Pressure D rop - bar
0
0 2 4 6
Flow - U Sgpm (105 SU S oil @ 120°F)
20151050
Flow - L/m in (21,8 cSt oil @ 49°C)
2
1
4
3
EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 A-691.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
62,0
(2.44)
Ø 15,80 (0.622)
0.875" – 14 Th
1
2
3
Ø 17,40 (0.685)
Ø 18,97 (0.747)
4
25,4 (1.00) hex
Ø 38,9
(1.53)
29,6
(1.16)
SV1-10-4/4M/4R - Solenoid Valve
4-way, 2-position spool type solenoid valve
Up to 23 L/min (6 USgpm) • 210 bar (3000 psi)
Model Code
1 2 3 4 8 9
SV1 10 (V) 4
5
(*)
7
**** * 00
8
Connector Types
Blank - No coil
G - ISO 4400 DIN 43650
Q - Spade terminals
W - Flying lead
N - Deutsch (DC only)
Y - Amp JR (DC only)
D - Metripack 150 male
(DC only)
J - Metripack 280 male
(DC only)
For coil part numbers and dimensions
see section C.
9
Special Features
00 - None
(Only required if valve has special
features omitted if "00".)
1
Function
SV1 - Solenoid valve
2
Size
10 - 10 size
3
Seal Material
Blank - Buna-N
V - Viton
®
4
Style
4 - 4-way, 2 position
5
Manual Override Option
Blank - No manual override
M - Knob type
R - Cable type
For valve dimensions with manual over-
ride option installed, see page A-980.
7
Voltage Rating
00 - No coil
12D - 12VDC
24D - 24VDC
36D - 36VDC
24A - 24VAC
115A - 115VAC
230A - 230VAC
12B - 12VDC/w diode*
24B - 24VDC/w diode*
*Optional arc suppression diode.
6
Port Size
Code Port Size Housing Number
0 Cartridge only
3B 3/8" BSPP 02-179705*
6T SAE 6 566161*
2G 1/4" BSPP 876709
3G 3/8" BSPP 876715
6H SAE 6 876708
8H SAE 8 876713
*Light duty housing.
See section J for housing details.
6
**
Dimensions
mm (inch)
Torque cartridge in aluminum
housing 47-54 Nm (33-46 ft lbs)
Note: When solenoid valve
is ordered as cartridge only,
nut is included.
Note: Use J series 23W coils
with this solenoid valve.
Installation DrawingCartridge Only
WARNING
Maintain 5-8 Nm
(4-6 ft lbs) maximum
torque on valve tube nut.
Over tightening may cause
valve failure.
•
– – – – –
76.2
(3.00)
57.1
(2.25)
88.9
(3.50)
57.15
(2.250)
76.2
(3.00)
9.5
(0.38)
7.14
(0.281)
2-Slots
1
4
2
3
52.6
(2.07)
20.8
(0.82)
25.4
(1.00)
36.7
(1.44)
25.4
(1.00)
