EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009A-550.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120° F)
Typical Application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated Flow 23L/min (6 USgpm)
Max. flow port 1 to 2-10L/min (2.5 USgpm)
Internal leakage 164 cm
3
/min (10 in
3
/min) max @ 210 bar (3000 psi)
Temperature range -40° to 120° C (-40° to 248° F)
Coil Duty Continuous from 85% to 110% of normal voltage
Cavity C-10-3
Fluids All general purpose hydraulics fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight including coil 0,42 kg (0.93 lbs)
Seal kit 889624 (Buna-N), 889688 (Viton
®
)
Viton is a registered trademark of E.I. DuPont
SV1-10-3/3M/3R - Solenoid Valve
3-way, 2-position, spool type solenoid valve
Up to 23 L/min (6 USgpm) • 210 bar (3000 psi)
Operation
In the de-energized position this
valve allows flow from port 1 to
2 while port 3 is blocked.
In the energized position flow
is allowed from port 3 to port 1
while port 2 is blocked.
Features
Hardened, ground and honed
working parts to limit leakage.
IP69K Tough coil compatibility.
Continuously rated. Compact
design with low pressure drop.
Rated pressure on all ports.
Pressure Drop
Performance Data
Sectional View
Description
This is a 3-way 2-position,
direct acting, spool type sole-
noid valve. This valve can be
used in applications requiring
separate pressure and tank
lines, such as a single acting
cylinder or any other applica-
tion where a three way two
position solenoid valve is
needed.
3
2
1
Pressure Drop - bar
6
5
4
3
7
2
1
Pressure Drop - psi
100
25
0
50
75
0 5 10 15 20
Flow - L/m in (21,8 cSt oil @ 49°C)
B
A
0 1 2 3 4 5 6
Flow - U Sgpm (105 SU S oil @ 120°F)
1
2
3
EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 A-551.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
CODE PORT SIZE HOUSING NUMBER
0 Cartridge only
3B 3/8" BSPP 02-173358*
6T SAE6 566162*
2G 1/4" BSPP 876705
3G 3/8" BSPP 876714
6H SAE 6 876704
8H SAE 8 876711
*Light duty housing
See section J for housings.
1
Function
SV1 - Solenoid valve
2
Size
10 - 10 size
3
Seal Material
Blank - Buna-N
V - Viton
®
4
Style
3 - 3-way, 2 position
5
Manual Override Option
Blank - No manual override
M - Knob Type
R - Cable Type
For valve dimensions with manual over-
ride option installed see page A-980.
6
Port Size
SV1-10-3/3M/3R - Solenoid Valve
3-way, 2-position, spool type solenoid valve
Up to 23 L/min (6 USgpm) • 210 bar (3000 psi)
8
Connector Types
Blank - No coil
G - ISO 440 DIN 43650
Q - Spade terminals
W - Flying lead
N - Deutsch (DC only)
Y - Amp JR (DC only)
D - Metripack 150 male
(DC only)
J - Metripack 280 male
(DC only)
For coil dimensions see section C.
9
Special Features
00 - None
(Only required if valve has special
features, omitted if "00".)
Note: Use J series, 23W coils with
this solenoid valve.
7
Voltage Rating
00 - No coil
12D - 12VDC
24D - 24VDC
36D - 36VDC
24A - 24VAC
115A - 115VAC
230A - 230VAC
12B - 12VDC/w diode*
24B - 24VDC/w diode*
*Optional arc suppression diode
SV1 10 (V) 3 (*) ** * 00
Model Code
1 2 3 4 5 6 8 97
****
Dimensions
mm (inch)
Torque cartridge in aluminum
housing 47-54 Nm (35-40 ft lbs).
Note: When solenoid valve is
ordered as cartridge only, coil
nut is included.
Installation Drawing (Aluminum)Cartridge Only
WARNING
Maintain 5-8 Nm
(4-6 ft lbs) maximum
torque on valve tube nut.
Over tightening may cause
valve failure.
•
– – – –
75,4
(2.97)
34,8
(1.37)
25,4
(1.00)
24,6
(.97)
18,8
(.74)
57.2
(2.25)
75.4
(2.97)
57.15
(2.250)
9.5
(0.38)
2X7,14
(0.281)
1
2
3
50
(1.97)
57.1
(2.25)
