EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009A-350.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120° F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 76 L/min (20 USgpm)
Internal leakage, port 1 to port 2 or port 2 to port 1 5 drops/min, max @ 350 bar (5000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-10-2
Fluids All general purpose hydraulics fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum or Steel
Weight including coil 0,18 kg (0.39 lbs)
Seal kit 565806 (Buna-N), 889627 (Viton
®
)
Viton is a registered trademark of E.I. DuPont
Operation
IIn the de-energized posi-
tion the valve is open in both
directions. A series of internal
check valves allows full flow in
both directions.
When the solenoid is ener-
gized the pilot poppet closes
the pilot orifice causing the
main poppet to close.
Features
Hardened and ground work-
ing parts. Lapped seat for
low leakage. IP69K Tough coil
compatibility. Continuously
rated. Compact design with low
pressure drop. 350 bar working
pressure.
Description
This is a 2-way 2-position, high
pressure bi-directional, pilot
operated, normally open poppet
type screw in cartridge valve.
The valve is ideal for isolating
and holding actuators in posi-
tion.
SBV11-10-O - Solenoid Bi-directional Valve
Bi-directional, normally open solenoid valve
76 L/min (20 USgpm) • 350 bar (5000 psi)
Pressure Drop
Cartridge only
Performance
Sectional View
Port 1 to port 2 or port 2
to port 1 de-energized
2
1
50
100
150
200
4
8
12
0 20 40 60
Flow - L/m in (21,8 cSt oil @ 49°C)
04 81 2
1612840 20
Flow - U Sgpm (105 SU S oil @ 120°F)
1
2