EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009A-180.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 76 L/min (20 USgpm)
Internal leakage 5 drops/min, max @ 350 bar (5000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-10-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum or steel
Weight cartridge only 0,18 kg (0.39 lbs)
Seal kit 565806 (Buna-N), 889627 (Viton
®
)
Viton is a registered trademark of E.I. DuPont
SBV11-10-C - Solenoid Valve
2-way, 2-position, normally closed, bi-directional, poppet type solenoid valve
76 L/min (20 USgpm) • 350 bar (5000 psi)
Description
This is a 2-way 2-position, high
pressure bi-directional, pilot
operated, normally closed pop-
pet type screw in cartridge
valve. The valve is ideal for
isolating and holding actuators
in position.
Operation
In the de-energized position
the valve is blocked in both
directions.
When the solenoid is
energized the pilot poppet
is released from the seat
allowing the main poppet
to open. A series of internal
check valves allows full flow in
both directions.
Features
Hardened and ground working
parts. Lapped seat for low
leakage. IP69K Tough coil
compatibility. Continuously
rated. Compact design with
low pressure drop. 350 bar
working pressure.
Performance Data
Sectional View
Pressure Drop
Cartridge only
A - Port 1 to port 2
B - Port 2 to port 1
2
1
12
9
6
3
Pressure Drop - bar
B
A
Pressure D rop - psi
175
125
75
25
200
0 20 40 60
Flow - L/m in (21,8 cSt oil @ 49°C)
0 4 8 12 16 20
Flow - U Sgpm (105 SUS oil @ 120°F)
1
2
EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 A-181.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Dimensions
mm (inch)
Torque cartridge in housing
A - 47-54 Nm (35-40 ft lbs)
S - 68-75 Nm (50-55 ft lbs)
Note: For applications above
210 bar please consult our
technical department or use
the steel body option.
SBV11-10-C - Solenoid Valve
2-way, 2-position, normally closed, bi-directional, poppet type solenoid valve
76 L/min (20 USgpm) • 350 bar (5000 psi)
1
Function
SBV11 - Solenoid
bi-directional valve
2
Size
10 - 10 size
3
Seal Material
Blank - Buna-N
V - Viton
®
4
Style
C - Normally closed
5
Valve Housing Material
Blank - Cartridge only
A - Aluminum
S - Steel
Code Port Size Housing Number
Aluminium Steel
0 Cartridge only
2G 1/4" BSPP 876702 02-175102
3G 3/8" BSPP 876703 02-175103
3B 3/8" BSPP 02-175462 –
6H SAE 6 876700 –
6T SAE 6 566151 02-175100
8H SAE 8 876701 –
8T SAE 8 – 02-175101
See section J for housing details.
6
Port Size
8
Connector Types
Blank - No coil
G - ISO 4400 DIN 43650
Q - Spade terminals
W - Flying lead
N - Deutsch (DC only)
Y - Amp JR (DC only)
D - Metripack 150 male
(DC only)
J - Metripack 280 male
(DC only)
9
Coil Series
H - 10 series, 29 W
For coil part numbers and dimensions
see section C.
10
Special Features
00 - None
(Only required if valve has special
features, omitted if “00.”)
7
Voltage Rating
00 - No coil
12D - 12VDC
24D - 24VDC
36D - 36VDC
24A - 24VAC
115A - 115VAC
230A - 230VAC
12B - 12VDC/w diode*
24B - 24VDC/w diode*
*Optional arc suppression diode.
Model Code
1 2 3 4 5 6 7 8 9 10
SBV11 10 (V) C (*) ** **** * H 00
WARNING
Maintain 5-8 Nm
(4-6 ft lbs) maximum
torque on valve tube nut.
Over tightening may cause
valve failure.
•
WARNING
Aluminum housings
can be used for
pressures up to 210 bar (3000
psi). Steel housings must be
used for operating pressures
above 210 bar (3000 psi).
•
Installation Drawing (Steel)Cartridge Only
– – – – –
1
2
2X 7.1
(0.28)
19.1 (0.75)
22.2
(0.37)
57.8
(2.28)
50.8
(2.00)
63.5
(2.50)
9.5
(0.37)
63.5 (2.50)
44.46 (1.750)
Ø 15,81
(0.622)
22,2 (0.87) hex
25,4
(1.00)
hex
0.875"–
14 Thd.
Ø 38,9
(1.53)
29,6
(1.16)
57,8
(2.28
)
31,7
(1.25)
1
2
