EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009A-310.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49° C (120° F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 60 L/min (15 USgpm)
Internal leakage, port 1 to port 2 & port 2 to port 1 5 drops/min max @ 350 bar (5000 psi)
when energized
Temperature range -40° to 100° C (-40° to 212° F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-8-2
Fluids All general purpose hydraulics fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum or steel
Weight cartridge only 0,12 kg (0.26 lbs)
Seal kit 02-160777 (Buna-N), 02-160778 (Viton
®
)
Viton is a registered trademark of E.I. DuPont
SBV11-8-O - Solenoid Bi-directional Valve
Bi-directional, normally open solenoid valve
60 L/min (15 USgpm) • 350 bar (5000 psi)
Description
This is a 2-way 2-position, high
pressure bi-directional, pilot
operated, normally open poppet
type screw in cartridge valve.
The valve is ideal for isolating
and holding actuators in posi-
tion.
Operation
In the de-energized position the
valve is open in both directions.
A series of internal check valves
allows full flow in both direc-
tions.
When the solenoid is energized
the pilot poppet closes the pilot
orifice causing the main poppet
to close.
Features
Hardened and ground work-
ing parts. Lapped seat for
low leakage. IP69K Tough coil
compatibility. Continuously
rated. Compact design with low
pressure drop. 350 bar working
pressure.
Pressure
Drop
Cartridge only
Performance DataSectional View
A - Port 1 to port 2
B - Port 2 to port 1
2
1
Pressure Drop - psi
300
250
200
150
100
50
0
A
B
Pressure D rop - bar
4
8
0
12
16
20
8 16 24 32 4840 560
Flow - L/m in (21,8 cSt oil @ 49°C)
1 3 5 7 9 11 13 15
Flow - USgpm (105 SU S oil @ 120°F)
1
2
EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 A-311.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
SBV11-8-O - Solenoid Bi-directional Valve
Bi-directional, normally open solenoid valve
60 L/min (15 USgpm) • 350 bar (5000 psi)
Model Code
1
Function
SBV11 - Solenoid
bi-directional valve
2
Size
8 - 8 size
3
Seal Material
Blank - Buna-N
V - Viton
®
4
Style
O - Normally open
5
Valve Housing Material
Blank - Cartridge only
A - Aluminum
Code Port Size Housing Number
Aluminium Steel
0 Cartridge only
2G 1/4" BSPP 02-160727 02-160733
3G 3/8" BSPP 02-160728 02-160734
4T SAE 4 02-160730 02-160736
6T SAE 6 02-160731 02-160737
8T SAE 8 02-160732 02-160738
See section J for housing details.
6
Port Size
8
Connector Types
Blank - No coil
G - ISO 4400 DIN 43650
Q - Spade terminals
W - Flying lead
N - Deutsch (DC only)
Y - Amp JR (DC only)
D - Metripack 150 male
(DC only)
J - Metripack 280 male
(DC only)
9
Coil Series
P - 8 Series, 23 W
For coil part numbers and
dimensions see section C.
10
Special Features
00 - None
(Only required if valve has special
features, omitted if “00”.)
1 2 3 4 5 6 7 8 9 10
SBV11 8 (V) O (*) ** **** * P 00
7
Voltage Rating
00 - No coil
12D - 12VDC
24D - 24VDC
36D - 36VDC
24A - 24VAC
115A - 115VAC
230A - 230VAC
12B - 12VDC/w diode*
24B - 24VDC/w diode*
*Optional arc suppression diode.
Dimensions
mm (inch)
Torque cartridge in aluminum
or steel housing 34-41 Nm
(25-30 ft lbs)
Note: When solenoid valve
is ordered as cartridge only,
coil nut is included.
WARNING
Maintain 5-8 Nm
(4-6 ft lbs) maximum
torque on valve tube nut.
Over tightening may cause
valve failure.
•
WARNING
Aluminum housings
can be used for
pressures up to 210 bar (3000
psi). Steel housings must be
used for operating pressures
above 210 bar (3000 psi).
•
Installation Drawing (Steel)Cartridge Only
– – – – –
38.1
(1.50)
50.8
(2.00)
2X 7.1
(0.28)
50.8 (2.00)
44.0 (1.73)
3.4
(0.13)
58.4
(2.30)
19.1
(0.75)
15.5
(0.61)
1
2
Ø 12,62
(0.497)
22,2
(0.87)
hex
19,0 (0.75) hex
0.750"–
16 Thd.
Ø 31,7
(1.25)
26,0
(1.02)
27,7
(1.0
9
58,4
(2.3
0
1
2
