EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009A-140.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi)
Cartridge fatigue pressure (infinite life) 310 bar (4500 psi)
Rated flow 60 L/min (15 USgpm)
Internal leakage, port 1 to port 2 & port 2 to port 1 5 drops/min, max @ 350 bar (5000 psi)
Temperature range -40° to 100°C (-40° to 212°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-8-2
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum or steel
Weight cartridge only 0,12 kg (0.26 lbs)
Seal kit 02-160777 (Buna-N), 02-160778 (Viton
®
)
Viton is a registered trademark of E.I. DuPont
SBV11-8-C - Solenoid Bi-directional Valve
Bi-directional, normally closed solenoid valve
60 L/min (15 USgpm) • 350 bar (5000 psi)
Description
This is a 2-way 2-position, high
pressure bi-directional, pilot
operated, normally closed pop-
pet type screw in cartridge
valve. The valve is ideal for
isolating and holding actuators
in position.
Operation
In the de-energized position
the valve is blocked in both
directions. When the solenoid
is energized the pilot poppet is
released from the seat allow-
ing the main poppet to open.
A series of internal check
valves allows full flow in both
directions.
Features
Hardened and ground work-
ing parts. Lapped seat for low
leakage. IP69K Tough coil com-
patibility. Continuously rated.
Compact design with low
pressure drop. 350 bar work-
ing pressure.
Performance Data
Sectional View
Pressure Drop
Cartridge only
A - Port 1 to port 2
B - Port 2 to port 1
2
1
Pressure Drop - psi
300
250
200
150
100
50
0
Flow - U Sgpm (105 SU S oil @ 120°F)
1 3 5 7 9 11 13 15
A
B
Flow - L/m in (21,8 cSt oil @ 49°C)
8 16 24 32 4840 560
Pressure D rop - bar
4
8
0
12
16
20
1
2
EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 A-141.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
SBV11-8-C - Solenoid Bi-directional Valve
Bi-directional, normally closed solenoid valve
60 L/min (15 USgpm) • 350 bar (5000 psi)
Model Code
1 2 3 4 5 6 9 10
SBV11 8 (V) C (*) (*)
8
****
7
** * P
11
00
9
Connector Types
Blank - No coil
G - ISO 4400 DIN 43650
Q - Spade terminals
W - Flying lead
N - Deutsch (DC only)
Y - Amp JR (DC only)
D - Metripack 150 male
(DC only)
J - Metripack 280 male
(DC only)
10
Coil Series
P - 8 series, 23 W
For coil part numbers and dimensions
see section C.
11
Special Features
00 - None
(Only required if valve has special
features omitted if “00.”)
1
Function
SBV11 - Solenoid valve
2
Size
8 - 8 size
3
Seal Material
Blank - Buna-N
V - Viton
®
4
Style
C - Normally closed
5
Manual Override Option
Blank - No manual override
M - Manual override
For valve dimensions with manual over-
ride option installed see page A-980.
6
Valve Housing Material
Blank - Cartridge only
A - Aluminum
S - Steel
7
Port Size
8
Voltage Rating
00 - No coil
12D - 12VDC
24D - 24VDC
36D - 36VDC
24A - 24VAC
115A - 115VAC
230A - 230VAC
12B - 12VDC/w diode*
24B - 24VDC/w diode*
*Optional arc suppression diode.
Code Port Size Housing Number
Aluminium Steel
0 Cartridge only
2G 1/4" BSPP 02-160727 02-160733
3G 3/8" BSPP 02-160728 02-160734
4T SAE 4 02-160730 02-160736
6T SAE 6 02-160731 02-160737
8T SAE 8 02-160732 02-160738
See section J for housing details.
WARNING
Aluminum housings
can be used for
pressures up to 210 bar (3000
psi). Steel housings must be
used for operating pressures
above 210 bar (3000 psi).
•
WARNING
Maintain 5-8 Nm
(4-6 ft lbs) maximum
torque on valve tube nut.
Over tightening may cause
valve failure.
•
– – – – –
Dimensions
mm (inch)
Torque cartridge in aluminum
or steel housing 34-41 Nm
(25-30 ft lbs)
Note: When solenoid valve is
ordered as cartridge only, coil
nut is included.
1
2
38.1
(1.50)
50.8
(2.00)
19.1
(0.75)
15.5
(0.61)
2X 7.1
(0.28)
50.8 (2.00)
44.0 (1.73)
3.4
(0.13)
58.4
(2.30)
58,4
(2.30
)
27,7
(1.09)
1
2
Installation Drawing (Steel)
Cartridge Only
