33
DGMDC Direct Check Valves
General Description
These SystemStak valves are
self-operating, spring loaded, poppet
type single or dual check units.
Location of the check element can be in
the “A”, “B”, “P” or “T” port.
A check in the “P” port is available as a
“Y” single check model only.
A check in the “T” port is available as an
“X” single check model only.
The dual check unit has identical check
elements in both the “A” and “B” ports.
Check valve cracking (opening)
pressures of 1 bar (15 psi), 2,5 bar
(35 psi) and 5 bar (75 psi) are available.
3 45 8761 2
1
2
Valve function
Manifold or subplate mounted
check valve.
Interface
5 - ISO 4401-AC-05-4-A, CETOP
RP35H, Size 5 ANSI/NFPA D05
5N - NFPA D05 (Alt. A)
5P - NFPA D05 (Alt. B)
Direction of flow
X - Free flow from actuator (load)
Y - Free flow to actuator (load)
3
4
5
Check location
A -Check in cylinder port “A”
(“Y” models only)
B -Check in cylinder port “B”
(“Y” models only)
P -Check in pressure port “P”
(“Y” models only)
T -Check in tank port “T
A
”
(“X” models only)
Cracking pressure
K - 1,0 bar (15 psi)
M - 2,5 bar (35 psi)
N - 5,0 bar (75 psi)
Check location: second function
Omit for single check models.
B -Check in cylinder port “B”
(dual check models only)
Cracking pressure:
second function
Omit for single check models.
K - 1,0 bar (15 psi)
M - 2,5 bar (35 psi)
N - 5,0 bar (75 psi)
Design number - 30 series
Subject to change. Installation
dimensions unaltered for design
numbers 30 to 39 inclusive.
7
6
8
Model Code