EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009A-580.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cST (105 SUS) and 49°C (120°F)
Typical application pressure 210 bar (3000 psi)*
*Flow from P1 to P2 must be less than 7,6 L/min (2 USgpm)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 23 L/min (6 USgpm)
Max. flow port 1 to port 2-10 L/min (2.5 USgpm)
Internal leakage 164 cm
3
/min (10 in
3
/min) max @ 210 bar (3000 psi)
Temperature range -40° to 120°C (-40° to 248°F)
Coil duty Continuous from 85% to 110% of nominal voltage
Cavity C-10-3
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration Cleanliness code 18/16/13
Housing material (standard) Aluminum
Weight including coil 0,42 kg (0.93 lbs)
Seal kit 889624 (Buna-N), 889688 (Viton
®
)
Viton is a registered trademark of E.I. DuPont
SV4-10-3/3P/3S - Solenoid Valve
3-way, 2-position spool type solenoid valve
Up to 23 L/min (6 USgpm) • 210 bar (3000 psi)
Description
This is a 3-way 2-position,
direct acting, spool type
solenoid valve. This valve
can be used in applications
requiring separate pressure
and tank lines, such as a single
acting cylinder or any other
application where a three way
two position solenoid valve is
needed
Operation
In the de-energized position
this valve allows flow from
port 2 to 1 while port 3 is
blocked.
In the energized position flow
is allowed from port 2 to port
3 while port 1 is blocked.
Features
Hardened, ground and honed
working parts to limit leakage.
IP69K Tough coil compatibility.
Continuously rated. Compact
design with low pressure drop.
Rated pressure on all ports.
Pressure Drop
Cartridge only
Performance DataSectional View
A - Port 3 to port 2 energized
B - Port 2 to port 1 de-energized
3
2
1
A
B
15
30
45
60
75
0
90
Pressure Drop - psi
5
3
2
4
6
1
Pressure D rop - bar
15 201050
Flow - L/m in (21,8 cSt oil @ 49°C)
0 1 2 3 4 5 6
Flow - U Sgpm (105 SUS oil @ 120°F)
2
1
3
EATON Screw-In Cartridge Valves E-VLSC-MC001-E December 2009 A-581.A
An Eaton Brand
A
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
1
Function
SV4 - Solenoid valve
2
Size
10 - 10 size
3
Seal Material
Blank - Buna-N
V - Viton
®
4
Style
3 - 3-way, 2 position
5
Manual Override Option
Blank - No manual override
M - Manual override
P - Push type
S - Screw type
For valve dimensions with
manual override option installed
see page A-980.
Code Port Size Housing Number
0 Cartridge only
3B 3/8” BSPP 02-173358*
6T SAE6 566162*
2G 1/4” BSPP 876705
3G 3/8” BSPP 876714
6H SAE 6 876704
8H SAE 8 876711
*Light duty housing.
See section J for housings.
6
Port Size
8
Connector Types
Blank - No coil
G - ISO 4400 DIN 43650
Q - Spade terminals
W - Flying lead
N - Deutsch (DC only)
Y - Amp JR (DC only)
D - Metripack 150 male
(DC only)
J - Metripack 280 male
(DC only)
For coil dimensions see section C.
9
Special Features
00 - None
(Only required if valve has special
features, omitted if “00.”)
Note: Use J series, 23 W coils
with this solenoid valve.
SV4-10-3/3P/3S - Solenoid Valve
3-way, 2-position spool type solenoid valve
Up to 23 L/min (6 USgpm) • 210 bar (3000 psi)
Model Code
1 2 3 4 5 6 7 8 9
SV4 10 (V) 3 (*) ** **** * 00
7
Voltage Rating
00 - No coil
12D - 12VDC
24D - 24VDC
36D - 36VDC
24A - 24VAC
115A - 115VAC
230A - 230VAC
12B - 12VDC/w diode*
24B - 24VDC/w diode*
*Optional arc suppression diode.
Dimensions
mm (inch)
Torque cartridge in aluminum
housing 47-54 Nm (35-40 ft lbs)
Note: When solenoid valve is
ordered as cartridge only, coil
nut is included.
WARNING
Maintain 5-8 Nm
(4-6 ft lbs) maximum
torque on valve tube nut.
Over tightening may cause
valve failure.
•
WARNING
Flow from port 1 to
port 2 must be less
than 7,6 L/min (2 USgpm).
•
Installation Drawing
Cartridge Only
– – – – –
38.1
(1.50)
26.2
(3.00)
57.2
(2.25)
9.5
(0.38)
57,15
(2.25)
75,4
(2.97)
2X7,14
(0.28)
2
1
34,8
(1.37)
25.4
(1.00) Hex
3
19.1
(0.75) Hex
25.4
(1.00)
75,4
(2.97)
24,6
(0.97)
18,8
(0.74)
50
(1.97)
