FLOW LITRES/MIN
24
FLOW-US GPM
PRESSURE-BAR
30
4
00
8
12
60
S612 & S613
8
16
20
24
0016
PRESSURE-PSI
S607 & S608
90
120
60
150
120
175
32
230
290
350
40
1
2
1
2
2
1
2
1
2
1
2
1
S607
APPLICATION
COIL INFORMATION
PRESSURE DROP v’s FLOW
SPECIFICATIONS
Integrated Hydraulics Ltd Integrated Hydraulics Inc
Collins Road, Heathcote Ind. Est., Warwick, CV34 6TF, UK. 7047 Spinach Drive, Mentor, Ohio 44060, USA
Tel: +44 (0) 1926 881171 Fax: +44 (0) 1926 315729 Tel: (440) 974 3171 Fax: (440) 974 3170
Website: www.integratedhydraulics.com Website: www.integratedhydraulics.com
11-1811.B
Symbol
Max. Working Pressure
Flow Rating
250 bar (3600 psi)
100 litres/min (26 US GPM)
Basic Model Code
Temperature Range
Nominal Viscosity Range
Recommended Filtration
Fluid
Seal Material
Mounting Position
Cartridge Weight
Coil Weight
Cavity Number
S607/S608: 0.6 ml/min (10 dpm)
S612/S613: Less than 60 ml/min
210 bar differential at 32 centistokes
-20 to +120°C (-4 to +248°F)
15 to 250 centistokes
BS5540/4 18/13 (25 micron or better)
Compatible with most general
purpose hydraulic fluids
Standard nitrile with PTFE back up rings
Unrestricted
0.25 kg (0.55 lbs)
0.2 kg (0.4 lbs)
A881 (See Section 17)
Torque into Cavity 60 Nm (44 lbs ft)
Electrical Data See coil data sheet
Internal Leakage
Nominal Flow
(at Delta P = 5 bar (70 psi))
FEATURES
High flow capacity with reduced space requirements.
No dynamic seals.
Standard valve bodies and common cavities.
One-piece encapsulated coil with minimal amperage draw.
Oil immersed armature solenoid.
Various coil terminals and voltages.
Coil interchangeability with all Series S2 valves.
Manual override, seal variations and other options available.
Sealed coil arrangement to protect stem from corrosion.
Line Body Material Aluminium Alloy (up to 210 bar*)
S607 Poppet Type (N.O.)
S608 Poppet Type (N.C.)
S612 Spool Type (N.O.)
S613 Spool Type (N.C.)
100 litres/min (26 US GPM) 250 bar (3600 PSI)
S607 / S608 & S612 / S613 Directional Control Valve
2-Way, 2-Position Poppet/Spool
S608
POPPET TYPE
NORMALLY OPEN
(as shown)
POPPET TYPE
NORMALLY CLOSED
To give on-off control of flows up to 100 litres/min (26
US GPM) and pressures up to 250 bar (3600 psi).
90 litres/min (23 US GPM)
(See Page 11-1021)
Part Number: C13-*-*/14
Voltage available: 12, 24 VDC
110, 220 VAC*
* AC coils must be used with a rectifying connector.
S612 S613
SPOOL TYPE
NORMALLY OPEN
(as shown)
SPOOL TYPE
NORMALLY CLOSED
S607 S608
S612 S613
Viscosity = 32 cSt (150 SSU)
11
Seal Kit Number
SK390 (Nitrile) SK390V (Viton)
*For applications above 210 bar please consult our technical department or use the steel body option.
19.00 A/F
32.00 A/F
2
1
1"-14-UNS-2A
NORMALLY CLOSED
NORMALLY OPEN
36.00
38.507.40
23.50
51.40
53.90
56.70
48.00
ø19.00
35.0
71.4
92.0
31.8
50.8
6.3
38.1
50.8
2 HOLES ø8.7
THRO'
1 1
TORQUE
3.4Nm
12.7
25.4
2
2
1
2
2 HOLES
ø9.0 THRO'
1
13.00
19.00
38.10
10.00
50.80
35.00
19.00
50.80
89.00
TORQUE
3.4Nm
Body ONLY part numbers
BSP, aluminium
1/2” B4851
3/4” B3954
SAE, aluminium
1/2” B19403
3/4” B19404
BSP, aluminium
3/8” C1084
1/2” C1044
3/4” C1086
Body ONLY part numbers
BSP, steel
1/2” C593
3/4” C4917
SAE, aluminium
3/8” B10784
1/2” C7140
3/4” B10506
SAE, aluminium
3/4” B10742
ORDERING CODE EXAMPLE
We reserve the right to change specifications without notice
11-1812.B
COMPLETE VALVE
Basic Code
S607 = Poppet Type (normally open)
S608 = Poppet Type (normally closed)
S612 = Spool Type (normally open)
S613 = Spool Type (normally closed)
Seals
N = Nitrile
V = Viton
Manual Override (consult factory for
availability)
3 = Push (S607 & 612)
Voltage
12 = 12 VDC 110 = 110 VAC
24 = 24 VDC 220 = 220 VAC
Coil Termination
H = DIN43650
F = Flying Leads
DM = Deutsch Moulded
Other terminations available on request
Port Sizes
3W = 3/8” BSP 6T = 3/8” SAE
4W = 1/2” BSP
8T = 1/2” SAE
6W = 3/4” BSP 12T = 3/4” SAE
Where measurements are critical request certified drawings
BASIC CODE: S607 Poppet Type (N.O.) S612 Spool Type (N.O.)
S608 Poppet Type (N.C.) S613 Spool Type (N.C.)
1/2” 3/4” PORTS
CARTRIDGE ONLY
BASIC CODE: S607 Poppet Type (N.O.) S612 Spool Type (N.O.)
S608 Poppet Type (N.C.) S613 Spool Type (N.C.)
11
Body Type
Omit = Standard
T = Through ported
S6** N H 24 4W
T
