2
1
2
1
0.8
FLOW LITRES/MIN
0.2
FLOW-US GPM
P
R
E
S
S
U
R
E
-
B
A
R
0.2
2
00
6
4
8
0.60.4
14
10
12
16
000.1
P
R
E
S
S
U
R
E
-
P
S
I
1.41.21.0 1.6
0
120
60
0.3
160
240
0.4
S207
APPLICATION
COIL INFORMATION
PRESSURE DROP v’s FLOW
SPECIFICATIONS
Integrated Hydraulics Ltd Integrated Hydraulics Inc
Collins Road, Heathcote Ind. Est., Warwick, CV34 6TF, UK. 7047 Spinach Drive, Mentor, Ohio 44060, USA
Tel: +44 (0) 1926 881171 Fax: +44 (0) 1926 315729 Tel: (440) 974 3171 Fax: (440) 974 3170
Website: www.integratedhydraulics.com Website: www.integratedhydraulics.com
11-1711.A
(See Page 11-1021)
Part Number: C13-*-*/22
Voltage available: 12, 24 VDC
110, 220 VAC*
* AC coils must be used with a rectifying connector.
Basic Model Code
Symbol
Max. Working Pressure
Flow Rating
210 bar (3000 psi) - Port 2
350 bar (5000 psi) - Port 1
1 litre/min (0.25 US GPM)
Temperature Range
Nominal Viscosity Range
Recommended Filtration
Fluid
Seal Material
Mounting Position
Cartridge Weight
Coil Weight
Cavity Number
0.3 ml/min (5 dpm) when energised
210 bar differential at 32 centistokes
-20 to +120°C (-4 to +248°F)
15 to 250 centistokes
BS5540/4 18/13 (25 micron or better)
Compatible with most general
purpose hydraulic fluids
Standard nitrile with PTFE back up rings
Unrestricted
0.1 kg (0.2 lbs)
0.2 kg (0.4 lbs)
A879 (See Section 17)
Torque into Cavity 20 Nm (15 lbs ft)
Electrical Data See coil data sheet
Internal Leakage
Nominal Flow
(at Delta P = 5 bar (70 psi))
FEATURES
Pilot flow capacity with reduced space requirements.
No dynamic seals.
Standard valve bodies and common cavities.
One-piece encapsulated coil with minimal amperage draw.
Oil immersed armature solenoid.
Various coil terminals and voltages.
Coil interchangeability with all Series S2 valves.
Manual override, seal variations and other options available.
Sealed coil arrangement to protect stem from corrosion.
Line Body Material Aluminium Alloy (up to 210 bar*)
S207
1 litre/min (0.25 US GPM)
350 bar (5000 PSI)
S207 Directional Control Valve - 2-Way, 2-Position Poppet
NORMALLY OPEN
To give on-off control of flows up to1 litre/min (0.25 US
GPM) and pressures up to 350 bar (5000 psi). Typical
usage includes the control of the pilot or vent flow of
another valve, for example a ventable relief valve.
(See Section 2).
NOTE: This valve can be used to vent systems at
pressures up to 350 bar (5000 psi) on the
inlet port but pressure on the outlet port
should be limited to 210 bar (3000 psi).
1 litre/min (0.25 US GPM)
Viscosity = 32 cSt (150 SSU)
Seal Kit Number
SK1043V (Viton)
11
*For applications above 210 bar please consult our technical department or use the steel body option.
2
1
2 HOLES
ø6.8 THRO'
31.80
15.90
1
2
.
8
0
5
0
.
8
0
16.00
19.00
6.00
2
2
.
0
0
6
.
0
0
50.00
2
1
24.00 A/F
3/4"-16-UNF-2A
36.00
23.50
48.00
2
7
.
3
0
ø12.60
3
8
.5
0
5
9
.
0
0
8
.
2
5
ORDERING CODE EXAMPLE
We reserve the right to change specifications without notice
11-1712.C
Basic Code
S207 = (normally open)
Seals
V = Viton
Voltage
12 = 12 VDC 110 = 110 VAC
24 = 24 VDC 220 = 220 VAC
Coil Termination
H = DIN43650
F = Flying Leads
DM = Deutsch Moulded
Other terminations available on request
Port Sizes
2W = 1/4” BSP
3W = 3/8” BSP 6T = 3/8” SAE
Where measurements are critical request certified drawings
CARTRIDGE ONLY
BASIC CODE: S207
COMPLETE VALVE
BASIC CODE: S207
1/4” 3/8” PORTS
S207 V H 24 3W
Body ONLY part numbers
BSP, aluminium
1/4” A1485
3/8” A1043
SAE, aluminium
3/8” A15676
BSP, steel
3/8” A14175
SAE, steel
3/8” A14843
11
