2
1
0.8
FLOW LITRES/MIN
0.2
FLOW-US GPM
PRESSURE-BAR
0.2
2
00
6
4
8
0.60.4
14
10
12
16
000.1
PRESSURE-PSI
1.41.21.0 1.6
0
120
60
0.3
160
240
0.4
2
1
2
1
S205
APPLICATION
COIL INFORMATION
PRESSURE DROP v’s FLOW
SPECIFICATIONS
Integrated Hydraulics Ltd Integrated Hydraulics Inc
Collins Road, Heathcote Ind. Est., Warwick, CV34 6TF, UK. 7047 Spinach Drive, Mentor, Ohio 44060, USA
Tel: +44 (0) 1926 881171 Fax: +44 (0) 1926 315729 Tel: (440) 974 3171 Fax: (440) 974 3170
Website: www.integratedhydraulics.com Website: www.integratedhydraulics.com
11-1611.A
Basic Model Code
Symbol
Max. Working Pressure
Flow Rating
210 bar (3000 psi)
1 litre/min (0.25 US GPM)
Basic Model Code
Temperature Range
Nominal Viscosity Range
Recommended Filtration
Fluid
Seal Material
Mounting Position
Cartridge Weight
Coil Weight
Cavity Number
0.3 ml/min (5 dpm) when closed
210 bar differential at 32 centistokes
-20 to +120°C (-4 to +248°F)
15 to 250 centistokes
BS5540/4 18/13 (25 micron or better)
Compatible with most general
purpose hydraulic fluids
Standard nitrile with PTFE back up rings
Unrestricted
0.1 kg (0.2 lbs)
0.2 kg (0.4 lbs)
A879 (See Section 17)
Torque into Cavity 22 Nm (15 lbs ft)
Electrical Data See coil data sheet
Internal Leakage
Nominal Flow
(at Delta P = 5 bar (70 psi))
FEATURES
Pilot flow capacity with reduced space requirements.
No dynamic seals.
Standard valve bodies and common cavities.
One-piece encapsulated coil with minimal amperage draw.
Oil immersed armature solenoid.
Various coil terminals and voltages.
Coil interchangeability with all Series S2 valves.
Manual override, seal variations and other options available.
Sealed coil arrangement to protect stem from corrosion.
Line Body Material Aluminium Alloy
S205 (N.O.)
1 litre/min (0.25 US GPM) 210 bar (3000 PSI)
S205 / S206 Directional Control Valve - 2-Way, 2-Position Poppet
S206
NORMALLY OPEN
(as shown)
NORMALLY CLOSED
To give on-off control of flows up to 1 litre/min (0.25 US
GPM) and pressures up to 210 bar (3000 psi). Typical
usage includes the control of the pilot or vent flow of
another valve, for example a ventable relief valve. (See
Section 2).
1 litre/min (0.25 US GPM)
S206 (N.C.)
(See Page 11-1021)
Part Number: C13-*-*/14
Voltage available: 12, 24 VDC
110, 220 VAC*
* AC coils must be used with a rectifying connector.
Viscosity = 32 cSt (150 SSU)
11
Seal Kit Number
SK1043 (Nitrile) SK1043V (Viton)
2
1
2 HOLES
ø6.8 THRO'
31.80
15.90
1
2
.
8
0
5
0
.
8
0
16.00
19.00
6.00
2
2
.
0
0
6
.
0
0
50.00
2
1
2 HOLES
ø6.8 THRO'
31.80
15.90
1
2
.
8
0
5
0
.
8
0
16.00
19.00
6.00
2
2
.
0
0
6
.
0
0
50.00
2
1
24.00 A/F
3/4"-16-UNF-2A
36.00
23.50
48.00
2
7
.
3
0
ø12.60
3
8
.
5
0
5
9
.
0
0
9
.
5
5
ORDERING CODE EXAMPLE
We reserve the right to change specifications without notice
11-1612.B
CARTRIDGE ONLY COMPLETE VALVE
Basic Code
S205 = (normally open)
S206 = (normally closed)
Seals
N = Nitrile
V = Viton
Manual Override (consult factory for availability)
1 = Push and twist (S206 Only)
2 = Screw (S205 & S206)
Voltage
12 = 12 VDC 110 = 110 VAC
24 = 24 VDC 220 = 220 VAC
Coil Termination
H = DIN43650
F = Flying Leads
DM = Deutsch Moulded
Other terminations available on request
Port Sizes
2W = 1/4” BSP
3W = 3/8” BSP 6T = 3/8” SAE
S205 N H 24
Where measurements are critical request certified drawings
BASIC CODE: S206 (Normally Closed) BASIC CODE: S206 (Normally Closed)
1/4” 3/8” PORTS
3W
CARTRIDGE ONLY COMPLETE VALVE
BASIC CODE: S205 (Normally Open) BASIC CODE: S205 (Normally Open)
1/4” 3/8” PORTS
11
Body ONLY part numbers
BSP, aluminium
1/4” A1485
3/8” A1043
SAE, aluminium
3/8” A15676
BSP, steel
3/8” A14175
SAE, steel
3/8” A14843
Body ONLY part numbers
BSP, aluminium
1/4” A1485
3/8” A1043
SAE, aluminium
3/8” A15676
BSP, steel
3/8” A14175
SAE, steel
3/8” A14843
2
1
24.00 A/F
3/4"-16-UNF-2A
36.00
23.50
48.00
27.30
ø12.60
38.50
55.50
9.55
