Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001-E6—February 2021 www.eaton.com B-1
B
Where measurements are critical request certied drawings. We reserve the right to change specications without notice.
PPAR1-10 - Proportional valve
Proportional reducing/relief, spool
30 L/min (8 USgpm) • 207 bar (3000 psi)
Ratings and specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 207 bar (3000 psi)
Maximum Inlet Pressure 240 bar (3500 psi)
Cartridge fatigue pressure (infinite life) 207 bar (3000 psi)
Rated flow 30 L/min (8 USgpm)
Cavity C-10-3
Standard housing materials Aluminum
Temperature range -20° to 120°C (-4° to 248°F)
Fluids All general purpose hydraulic fluids such as:
MIL-H-5606, SAE 10, SAE 20, etc.
Filtration Cleanliness code 18/16/13
Weight cartridge and coil 0,44 kg (0.98 lbs)
Seal kits 565804 (Buna-N)
889599 (Viton
®
)
Viton is a registered trademark of E.I. DuPont
Operation
This valve remains open from port 2 to port 1 (port 3must be vented). Once the predetermined
pressure is reached at port 1, the spool shifts to restrict the inlet flow at port 2, which regulates the
pressure at port 1. If the pressure at port 1 exceeds the setting the valve, the spool will shift farther
and relieve to port 3.
Performance data
Pressure override characteristics
Pressure Over-ride, Reducing Mode, Energized Pressure Over-ride, Relieving Mode, Energized
0
500
1000
1500
2000
2500
3000
0 5 10 15 20 25 30
A
B
C
PPAR1-10-30-0-00
PPAR1-10-0.9-0-00
PPAR1-10-24-0-00
A
B
C
Port-1 Reduced Pressure -psi
Port-1 Flow (LPM)
5 10 15 20 25 30 35
PPAR1-10-30-0-00
PPAR1-10-0.8-0-00
PPAR1-10-24-0-00
A
B
B
C
0
500
1000
1500
2000
2500
3000
0
Port-1 Relief Pressure -psi
Port-3 Flow (LPM)
A