EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015H-110.A
H
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49°C (120°F)
Typical application pressure (all ports) 350 bar (5000 psi) steel housing
Cartridge fatigue pressure (infinite life) 280 bar (4000 psi)
Rated flow 23 L/min (6 USgpm)
Temperature range –40° to 120°C (–40° to 248°F)
Flow regulation accuracy 0,38–1,9 L/min (0.1–0.49 USgpm) ±20% @ 210 bar (3000 psi)
0,38–1,9 L/min (0.1–0.49 USgpm) ±40% @ 350 bar (5000 psi)
1,9 – 5,7 L/min (0.5–1.49 USgpm) ±15% @ 350 bar (5000 psi)
5,7–22,7 L/min (1.5–6 USgpm) ±10% @ 350 bar (5000 psi)
Factory set maximum flow rate accuracy under standard test conditions and within the above ranges
Cavity C-10-2
Fluids All general purpose hydraulic fluids such as
MIL-H-5606, SAE 10, SAE 20 etc.
Filtration
Cleanliness code 18/16/13
Standard housing material Aluminum or Steel
Weight cartridge only 0,12 kg (0.26 lbs)
Seal kit 565803 (Buna-N)
566086 (Viton
®
)
Viton is a registered trademark of E.I. DuPont
FR5-10 - Flow Regulator
Fixed, pressure compensated
23 L/min (6 USgpm) • 280 bar (4000 psi)
Operation
This valve maintains a
constant flow from port 1 to
port 2 based on 5.5 bar(80
psid) regardless of pressure
changes downstream on port
2. Reverse flow from port 2
to port 1 is at the value of
the fixed orifice and is non-
pressure compensated.
Performance Data
Typical Flow Regulation
Cartridge only
Features
Hardened and ground and
honed working components.
Cartridge construction for
maximum mounting flexibility.
A
B
C
D
140210 280 350
0
1000 2000
0
Differential pressure - bar
Differential pressure - psi
3000 4000 5000
70
0
1
2
3
4
5
6
24
20
16
12
8
4
Flow - L/min
(21,8 cSt oil @ 49°C)
Flow - USgpm
(105 SUS oil @ 120°F)
Sectional View
Description
This is a fixed orifice, pressure
compensated, restrictive flow
regulator screw-in cartridge
valve.
A – 21 L/min (5.5 USgpm)
B – 13,3 L/min (3.5 USgpm)
C – 7,8 L/min (2.0 USgpm)
D – 0,95 L/min (0.25 USgpm)
1
2
2
1
EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015 H-111.A
H
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
FR5-10 - Flow Regulator
Fixed, pressure compensated
23 L/min (6 USgpm) • 280 bar (4000 psi)
Model Code
FR 5 10 (V) F (*) ** *.* 00
1 2 3 4 5 6 7 8
Code Port Size Housing Number
Aluminium Aluminium Steel
Light duty Fatigue rated Fatigue rated
0 Cartridge only
3B 3/8" BSPP 02–175462 – –
2G 1/4" BSPP – 876702 02-175102
3G 3/8” BSPP – 876703 02-175103
6H SAE 6 – 876700 –
8H SAE 8 – 876701 –
6T SAE 6 566151 – 02-175100
8T SAE 8 – – 02-175101
See section J for housing details.
1 Function
FR5 - Flow regulator
2 Size
10 - 10 Size
3 Seal Material
Blank - Buna-N
V - Viton
®
4 Adjustment
F - Fixed orice
5 Valve Housing Material
Omit for cartridge only
A - Aluminum
S - Steel
7 Factory Set Flow Rate
(Specify in USgpm)
Range 0,4-9,5 L/min
(0.1-2.5 USgpm)
8 Special Features
00 - None
(Only required if valve has special
features, omitted if “00”)
6 Port Size
Dimensions
mm (inch)
25,4 (1.00) hex
0.875”-14 Thd.
20,8
(0.82)
31,7
(1.25)
Ø15,82 (0.623)
1
2
Cartridge
Basic Code
FR5-10
•
WARNING
Aluminum housings
can be used for
pressures up to 210 bar (3000
psi). Steel housings must be
used for operating pressures
above 210 bar (3000 psi).
Torque cartridge in housing
A - 47-54 Nm (35-40 ft lbs)
S - 68-75 Nm (50-55 ft lbs)
–
Installation Drawing (Steel)
– – ––
63.5
(2.50)
9.5
(0.37)
44.5
(1.75)
2 X Ø7.14
(0.281)
19
(0.75)
44.45
(1.750)
21.6
(0.85)
50.8
(2.00)
63.5
(2.50)
1
2
22.2
(0.87)
