EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015E-580.A
E
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
Ratings and Specifications
Performance data is typical with fluid at 21,8 cSt (105 SUS) and 49° C (120° F)
Typical application pressure (all ports) 210 bar (3000 psi)
Cartridge fatigue pressure (infinite life) 210 bar (3000 psi)
Rated flow 30 L/min (8 USgpm)
Minimum pilot pressure @ port 3 4 bar (60 psi)
Cavity C-16–3S
Standard housing materials Aluminum
Temperature range -40° to 120°C (-40° to 248°F)
Fluids All general purpose hydraulic fluids such as:
MIL–H–5606, SAE 10, SAE 20, etc.
Filtration Cleanliness Code 18/16/13
Pilot ratio 100:1
Weight cartridge only 0,28 kg (0.62 lbs)
Seal kits 565812 Buna–N
889611 Viton
®
Viton is a registered trademark of E.I. DuPont
ADV1-16 - Accumulator Discharge Valve
Poppet, normally open, external pilot
30 L/min (8 USgpm) • 210 bar (3000 psi)
Operation
The valve remains open
between port 1 and 2 until suf-
ficient pilot pressure is applied
to port 3.
This holds pressure in port
1 until the pilot pressure is
released allowing flow to take
place from port 1 to 2.
Features
Hardened poppet and seat.
Very low leakage when piloted
closed without exerting
excessive force on the seat.
Performance DataSectional View
Description
ADV1-16 is a poppet type
pilot to close check valve with
a 100 to 1 pilot ratio ideal
for accumulator discharge
applications.
Pressure Drop Curves
Cartridge only
Port 3 pilot pressure = 0
Pressure Drop - psi
Pressure Drop - bar
Flow - L/min (21,8 cSt oil @ 49°C)
Flow - USgpm (105 SUS oil @ 120°F)
0
500
1000
2000
24680
51015202530
200
0
0
3000
150
1500
100
2500
50
2
1
3
1
2
3
EATON Screw-In Cartridge Valves E-VLSC-MC001-E2 May 2015 E-581.A
E
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
ADV1-16 - Accumulator Discharge Valve
Poppet, normally open, external pilot
30 L/min (8 USgpm) • 210 bar (3000 psi)
Model Code
ADV1 16 (V)
***
100 00
1 2 3 4 5 6
1 Function
ADV1 - Accumulator
discharge valve
2 Size
16 - 16 size
3 Seal material
Blank - Buna-N
V - Viton
®
4 Port Size
0 - Cartridge only
Code Port Size Housing Number
Aluminum Aluminum
Light duty Fatigue rated
6B 3/4" BSPP 02–175471 –
12T SAE 12 566414 –
4G 1/2" BSPP – 802-160676
6G 3/4" BSPP – 876726
10H SAE 10 – 876725
12H SAE 12 – 876727
See section J for housing.
5 Pilot area ratio
Port 3: Port 1 - 100:1
(Minimum pilot pressure at
port 3 - 4 bar (60 psi)
6 Special features
00 - None
(Only required if valve has special
features, omitted if "00.")
55,3
(2.17)
Ø 25,37 (0.999
)
12,0
(0.47)
Ø 28,55 (1.124)
1
2
1.312"-12 Thd.
38,1 (1.50) hex
3
Dimensions
mm (inch)
Torque cartridge in housing
108-122 Nm (80-90 ft. lbs)
Installation DrawingCartridge Only
– – – –
114.3
(4.50)
114.3
(4.50)
10.3
(0.41)
54
(2.12)
12.7
(0.50)
88.9
(3.50)
93.68
(3.68)
54
(2.12)
2X8.74
(0.344)
31.8
(1.25)
31.8
(1.25)
2
2
