G-56
G
Where measurements are critical request certied drawings. We reserve the right to change specications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001
-E—January 20
18 www.eaton.com
Operation
Pressure on the valve port
2 causes the poppet to lift
against the spring force,
allowing the ow to the
cylinder port 1. Reverse ow
is prevented by the poppet
reseating. Pressure applied
to the pilot port 3 will
overcome the cylinder port
pressure and lift the poppet
from its seat, allowing ow
from the cylinder to valve port.
Features
Hardened and ground poppet
gives excellent ow capability
for valve size, positive
sealing and long working
life. Cartridge construction
allows installation in actuators,
manifold blocks and Hydraulic
Integrated Circuits. Fits the
same cavity as the overcenter
valves of a similar size.
Performance data
4SK90 - Check valve
Pilot-to-open, poppet type
90 L/min (24 USgpm) • 350 Bar (5000 psi)
Sectional view
Description
Pilot check valves allow ow
to pass in one direction, with
a low pressure drop, then
prevent reverse ow until pilot
pressure is applied. There
are many applications for this
valve type, the most common
being to lock and hold a
cylinder, or another hydraulic
actuator, in position.
These valves are ideally
suited for tting directly into
a cylinder, giving economy of
installation, direct control of
cylinder movement and ease
of servicing.
0 20 40 60 80 100
Flow - L/min
0 5 10 15 20 25
Flow - US gpm
320
240
160
80
0
22
16.5
11
5.5
0
Pressurep - psi
Pressurep - bar
Piloted open
Free ow
Pressure drop
3
1
2
Cyl (1)
Pilot (3)
Valve (2)
Ratings and specifications
Figures based on oil temperature of 40˚ C and viscosity of 32 cSt (150 SUS)
Rated flow 90 L/min (24 USgpm)
Maximum pressure 350 bar (5000 psi)
Pilot ratio 4:1
Cartrid ge material Working parts hardened and ground steel.
Zinc plated body
Mountin g position
Unrestricted
Cavity n umber A20092-T2A
Torque cartridge in to cavity 60 Nm (44 lbs. ft.)
Weight 0.39 kg (0.86 lbs.)
Seal kit number SK1093 (Nitrile)
SK1093V (Viton
®
)
Recommended Filtration level BS5540/4 Class 18/13 (25 micron nominal)
Operating temperature –30°C to +90°C (-22° to +194°F)
Leakage 0.3 ml/min n ominal (5 dpm)
Nominal viscosity range 5 to 500 cSt
Viton is a registered trademark of E. I. DuPont