G-54
G
Where measurements are critical request certied drawings. We reserve the right to change specications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001
-E—January 20
18 www.eaton.com
Operation
Pressure on the valve port
2 causes the poppet to lift
against the spring force,
allowing the ow to the
cylinder port 1. Reverse ow
is prevented by the poppet
reseating. Pressure applied to
the pilot port 3 will overcome
the cylinder port pressure
and lift the poppet from its
seat, allowing ow from the
cylinder to valve port.
Features
Hardened and ground poppet
gives excellent ow capability
for valve size, positive
sealing and long working
life. Cartridge construction
allows installation in actuators,
manifold blocks and Hydraulic
Integrated Circuits. Fits the
same cavity as the overcenter
valves of a similar size.
Pressure drop
Performance data
4SK30 - Check valve
Pilot-to-open, poppet type
30 L/min (8 USgpm) • 350 bar (5000 psi)
Sectional view
Description
Pilot check valves allow ow
to pass in one direction, with
a low pressure drop, then
prevent reverse ow until pilot
pressure is applied. There
are many applications for this
valve type, the most common
being to lock and hold a
cylinder, or another hydraulic
actuator, in position.
These valves are ideally
suited for tting directly into
a cylinder, giving economy of
installation, direct control of
cylinder movement and ease
of servicing.
Flow - L/min
Flow - US gpm
0 2.5 5.0 7.5 10 12
0 10 20 30 40 50
350
300
250
200
150
100
50
0
24.5
21
17.5
14
10.5
7
3.5
0
Free ow
Piloted open
Pressurep - psi
Pressure - bar
Pilot (3)
Valve (2)
Cyl (1)
3
1
2
Ratings and specifications
Figures based on oil temperature of 40˚ C and viscosity of 32 cSt (150 SUS)
Rated flow 30 L/min (8 USgpm)
Maximum pressure 350 bar (5000 psi)
Pilot ratio 3:1 and 5:1
Cartrid ge material Working parts hardened and ground steel.
Zinc plated body.
Mountin g position
Unrestricted
Cavity n umber A20090-T11A
Torque cartridge in to cavity 45 Nm (33 lbs ft.)
Weight 0.18 kg (0.39 lbs)
Seal kit number SK1079
SK1079V
(Nitrile)
(Viton
®
)
Recommended Filtration level BS5540/4 Class 18/13 (25 micron nominal)
Operating temperature –30° to +90° C (-22° to +194°F)
Leakage 0.3 ml/min n ominal
Nominal viscosity range 5 to 500 cSt
Viton is a registered trademark of E. I. DuPont