G-48
G
Where measurements are critical request certied drawings. We reserve the right to change specications without notice.
Eaton Hydraulic Screw-in Cartridge Valves (SiCV) E-VLSC-MC001
-E—January 20
18 www.eaton.com
3
1
2
4CK120 - Check valve
Pilot-to-open, poppet type
120 L/min (32 USgpm) • 350 bar (5000 psi)
Description
Pilot check valves allow ow
to pass in one direction, with
a low pressure drop, then
prevent reverse ow until pilot
pressure is applied. There are
many applications for this valve
type, the most common being
to lock and hold a cylinder, or
another hydraulic actuator, in
position.
These valves are ideally
suited for tting directly into
a cylinder, giving economy of
installation, direct control of
cylinder movement and ease
of servicing.
Operation
Pressure on the valve port
2 causes the poppet to lift
against the spring force,
allowing the ow to the
cylinder port 1. Reverse ow
is prevented by the poppet
reseating. Pressure applied to
the pilot port 3 will overcome
the cylinder port pressure and
lift the poppet from its seat,
allowing ow from the cylinder
to valve port.
Features
Hardened and ground poppet
gives excellent ow capability
for valve size, positive sealing
and long working life. Cartridge
construction allows installation
in actuators, manifold blocks
and Hydraulic Integrated
Circuits. Fits the same cavity
as the overcenter valves of a
similar size.
Pressure drop
Performance data
Sectional view
Pilot
(3)
Valve
(2)
Cyl (1)
Flow - US gpm
Flow - L/min
Pressure - psi
Pressure - bar
145
116
87
58
29
0
10
8
6
4
2
0
0 30 60 90 120 150
0 8 16 24 32 40
Piloted open
Free ow
Optional external
pilot post
Ratings and specifications
Figures based on: Oil Temp = 40° C Viscosity = 32 cSt (150 SUS)
Rated flow 120 L/min (32 USgpm)
Max pressure 350 bar (5000 psi)
Pilot ratio 3:1
Cartridge material Working parts hardened and ground steel.
Zinc plated body.
Standard housing material Standard aluminium (up to 210 bar).
Add suffix “377” for steel option.
Mountin g position Unrestricted
Cavity n umber A877 (See Section M)
Torque cartridge into cavity 100 Nm (74 lbs ft)
Weight 4CK120
4CK125
4CKK125
0.28 kg (0.62 lbs)
1.15 kg (2.54 lbs)
1.96 kg (4.32 lbs)
Seal kit number SK381 (Nitrile) SK381V (Viton
®
)
Recommended filtration level BS5540/4 Class 18/13 (25 micron nominal)
Operating temperature -30°C to +90°C (-22° to +194°F)
Leakage 0.3 milliliters/min nominal (5 dpm)
Nominal viscosity range 5 to 500 cSt
Viton is a registered trademark of E.I. DuPont