SOLENOID
RELIEF
PRESSURE
CONTROL
SEQUENCE
SHUTTLE
DIRECTIONAL
VALVES
TECHNICAL
DATA
ACCESSORIES
DSV2-100-2NCP
Normally-Closed, Two-Way, Two-Position,
Pilot-Operated Solenoid Valve
PRESSURE DROP VS. FLOW
CHECKMOTION
CONTROL
FLOW
CONTROL
S
ERIES 10
1.03.1
DESCRIPTION
A cartridge valve designed with positive shut off to be used in load
holding applications.
OPERATION
When de-energized, the DSV2-100-2NCP acts as a check valve, allowing
flow from ➀ to ➁, while blocking flow from ➁ to ➀.
When energized, the poppet lifts to open the ➁ to ➀ flow path.
Operation of Manual Override Option: To override, push button in,
twist counterclockwise and release. In this position, valve will remain
open in a detented condition.
To return to normal operation, push button in, twist clockwise and
release. Override will be detented in this position.
FEATURES and BENEFITS
• Continuous-duty solenoid.
• Hardened poppet and plunger for long life and low leakage.
• Efficient wet-armature construction.
• Cartridges are voltage interchangeable.
• Optional coil voltages and terminations.
• Filter screen standard.
• Manual override option.
• Industry common cavity.
• Compact size.
SPECIFICATIONS
Operating Pressure: 3000 PSI (207 Bar)
Flow: See PRESSURE DROP VS. FLOW graph.
Internal Leakage: 5 drops/min. max. at 3000 PSI (207 Bar)
Temperature: -30° F to +250° F (-35°C to +120° C)
Coil Rating: Continuous from 85% to 110% of rated voltage.
Current Draw: 12 VDC is 1.8 amps.
Minimum Pull-In Voltage: 85% of rated voltage at 3000 PSI (207 Bar)
Response Time: 80% of final change of state with 100% voltage
supplied at 100% of nominal flow rating.
Pull-In: 12 VDC 100 m. sec. Drop-Out: 12 VDC 180 m. sec.
Recommended Filtration: Critical Application-ISO 17/15/13
Non-Critical Application-ISO 20/18/14
Fluids: Mineral-based fluids. For other fluid compatibility consult factory.
Cavity/Cavity Tool: 100-2, see page 11.10.2
Body Material: Anodized 6061T6 aluminum
alloy rated at 3000 PSI (207 Bar).
USASI
ISO
➁
➀
➁
➀
➁
➀
10186-24 02/08
2008 Deltrol Catalog:Deltrol2004Run8 2/26/08 2:06 PM Page 10
DSV2-100-2NCP
Normally-Closed, Two-Way, Two-Position,
Pilot-Operated Solenoid Valve
1.03.2
INSTALLATION DIMENSIONS
( ) Parentheses = Millimeters
Omit coil for cartridge only with nut.
Other porting and coil options available – consult factory.
SOLENOID
TECHNICAL
DATA
SERIES 10
RELIEF PRESSURE
CONTROL
SEQUENCE
SHUTTLE
DIRECTIONAL
VALVES
ACCESSORIES
CHECK
MOTION
CONTROL
FLOW
CONTROL
DSV2 - 100 - 2 NC P - * - * - * * * - **
SOLENOID
VALVE
CAVITY/SEAL
FLOW PATH
NORMALLY CLOSED
POPPET
SEALS
N = Buna N
V = Viton
D = DC
A = AC
PORTING
2N = 1/4 PTF
3N = 3/8 PTF
6T = SAE 6
8T = SAE 8
Omit for Cartridge Only
COIL CONNECTION
D = Double Lead
S = Single Lead
H = Hirschmann
®
C = Conduit
B = Double Spade
E = Single Stud
M = Manual Override
(Omit for standard)
HOW TO ORDER
VOLTAGE
1 = 12 Volt
2 = 24 Volt
5 = 120 Volt
6 = 240 Volt
9 = 20 Volt
10 = 10 Volt
2008 Deltrol Catalog:Deltrol2004Run8 2/26/08 2:06 PM Page 11
