PRESSURE CONTROLS
Delta Power Company
4484 Boeing Drive - Rockford, IL 61109
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone: (815) 397-6628 Fax: (815) 397-2526 E-mail: delta@delta-power.com
SL-PCB Pressure Compensating Regulator Valve
DESCRIPTION
16 size, 1 5/16-12 thread, “Super” series, pressure compensating regulator valve.
OPERATION
The SL-PCB-0P with an orifice between ports (3) and (1) maintains a constant flow rate from (3) regardless
of load pressure changes in the system upstream of (3), or in the bypass leg at (2) as long as pressure at
(2) is less than (1).
The valve's spool maintains a constant differential pressure across a internal orifice, thereby regulating the
hydraulic flow rate from across this external orifice. (see options table for pressure ranges)
When used with an orifice as described above, it functions as a priority type regulator, delivering pump flow
first to the external orifice, then bypassing excess to (2). All ports may be fully pressurized.
The SL-PCB-0V with a dump valve and a pilot relief valve at (1) acts as main stage of a ventable relief
valve.
FEATURES
• Hardened parts for long life.
• Industry common cavity.
HYDRAULIC SYMBOL
Can be used as a logic element.
SL-PCB-0P is commonly used as a bypass flow regulator (100
PSI recommended).
SL-PCB-0V is commonly used as the main stage of a ventable
relief valve (50 and 100 PSI recommended).
PERFORMANCE
Actual Test Data (Cartridge Only)
VALVE SPECIFICATIONS
Nominal Flow 40 GPM (151 LPM)
Rated Operating Pressure 3500 PSI (241 bar)
Seat Ratio
Initially area of Pilot is 1.5 times the
area at Port (3), then 1:1
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating
Temperature Range
-40° to 250° F (-40° to 120° C)
Weight .71 lbs. (.32 kg)
Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque
Requirements
90 ft-lbs (122 Nm)
Cavity SUPER 3WS
Cavity Form Tool (Finishing) 40500017
Seal Kit 21191406
0
50
100
150
200
250
0 5 10 15 20 25 30 35 40
Flow (GPM)
Pressure @ Port 3 (PSI)
0
5
10
15
0 25 50 75 100 125 150
Flow (LPM)
Pressure @ Port 3 (BAR)
Port 3 to 2 (Undercut Cavity)
Port 3 to 2 (Standard Cavity)
0
50
100
150
200
250
300
350
0 5 10 15 20 25 30 35 40
Flow (GPM)
Pressure @ Port 3 (PSI)
0
5
10
15
20
0 25 50 75 100 125 150
Flow (LPM)
Pressure @ Port 3 (BAR)
Port 3 to 2 (Undercut Cavity)
Port 3 to 2 (Standard Cavity)
Page 350