SOLENOID OPERATED DIRECTIONAL CONTROLS
4484 Boeing Drive Rockford, IL 61109 • USA • Phone +1 (815) 397-6628 • Fax +1 (815) 397-2526
mail: delta@delta-power.com • www.delta-power.com
WARNING: the specications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specic application should not be undertaken
without independent study, evaluation, and testing for suitability.
W 44 / 12-2022
SJ-S2D PILOT OPERATED POPPET, 2 WAY NORMALLY OPEN
DESCRIPTION
16 size, 1 5/16-12 thread, “SIXTEEN” series, solenoid operated, 2 way normally open, pilot operated poppet
valve with free reverse ow energized and de-energized.
OPERATION
When de-energized the SJ-S2D allows ow to pass from (1) to (2), and (2) to (1). When energized the valve
blocks ow from (1) to (2) but allows free reverse ow from (2) to (1).
FEATURES
• Hardened parts for long life.
• Efcient wet-armature construction.
• Cartridges are voltage interchangeable.
• Industry common cavity.
• Unitized, molded coil design.
• Continuous duty rated solenoid.
• Optional coil voltages and terminations.
• Optional “I” Coil: Weatherproof, Thermal Shock, Immersion Safe.
Nominal Flow 40 GPM (151 LPM)
Rated Operating Pressure 3000 PSI (207 bar)
Typical Internal Leakage (150 SSU) 0-10 drops/min
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Weight .74 lbs (.33 kg)
Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque Requirements 90 ft-lbs (122 Nm)
Coil Nut Torque Requirements 4-6 ft-lbs (5.4-8.1 Nm)
Cavity SIXTEEN 2W
Cavity Tools Kit
(form tool, reamer, tap) 40500017
Seal Kit 21191400
Actual Test Data (Cartridge Only)
VALVE SPECIFICATIONS
0
50
100
0
150
10 20 30 40
0
5
Pressure Drop (PSI)
10
0 25 7550 125100 150
Flow (LPM)
Pressure Drop (bar)
Port 1 to 2 (de-eng) Port 2 to 1 (eng)
Flow (GPM)
Port 2 to 1 (de-eng)
PERFORMANCE
HYDRAULIC SYMBOL
2
1
SOLENOID OPERATED DIRECTIONAL CONTROLS
4484 Boeing Drive Rockford, IL 61109 • USA • Phone +1 (815) 397-6628 • Fax +1 (815) 397-2526
mail: delta@delta-power.com • www.delta-power.com
WARNING: the specications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specic application should not be undertaken
without independent study, evaluation, and testing for suitability.
W 44/ 12-2022
SOLENOID OPERATED DIRECTIONAL CONTROLS
Page SD85
Via Malavolti, 36 • 41122 Modena • ITALY • Phone +39 (059) 254895 • Fax +39 (059) 253512
mail: tecnord@tecnord.com • www.tecnord.com
4484 Boeing Drive Rockford, IL 61109 • USA • Phone +1 (815) 397-6628 • Fax +1 (815) 397-2526
mail: delta@delta-power.com • www.delta-power.com
WARNING: the specications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specic application should not be undertaken
without independent study, evaluation, and testing for suitability.
W 18 / 2017
SOLENOID OPERATED DIRECTIONAL CONTROLS
Delta Power Company
4484 Boeing Drive - Rockford, IL 61109
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone: (815) 397-6628 Fax: (815) 397-2526 E-mail: delta@delta-power.com
DIMENSIONS
DELTA POWER CO.
.41 [10.3] DIA.
MTG. HOLES
2X
#12 SAE PORTS
2X
BODY WEIGHT: 1.29 lbs [.58 kg]
1.00
[25.4]
2.00
[50.8]
2.90
[73.7]
1.22
[30.9]
3.00
[76.2]
.28
[7.1]
2.44
[61.9]
3.00
[76.2]
2.25
[57.2]
.96
[24.4]
ORDERING INFORMATION
SJ-S2D - - - -
OPTIONS BODIES
Buna Standard 00
Blank
Without Body
Viton Standard V0 N 3/4 NPTF Ports
Buna, Screen A0 S #12 SAE Ports
Viton, Screen W0
Buna, Override 0K VOLTAGE
Viton, Override VK 06 6 VDC
Buna, Screen, Override B2 12 12 VDC
Viton, Screen, Override V2 24 24 VDC
36 36 VDC
48 48 VDC Note: Use screen only if flow direction
is from (1) to (2). 25 24 VAC
11 120 VAC
22 220 VAC
44 440 VAC
“D” COIL TERMINATION
(All DC Except as Noted)
IMMERSION PROOF “D” TYPE
DL Double Lead SS Single Spade IA “I” Coil AMP Superseal – Integral
DT Deutsch on Leads DT04—2P DS Double Spade ID “I” Coil Deutsch – Integral DT04-2P
MI Metri-Pack on Leads HC Din 43650 (Hirschmann) – (AC & DC) IJ “I” Coil AMP Jr. Timer – Integral
PI Packard on Leads CL Conduit Lead – (AC Only) IM “I” Coil Metri-Pack – Integral
WL Weatherpack on Leads DI Deutsch – Integral DT04—2P
Approximate Coil Weight: .74 lbs/.33 kg.
Page 99
DIMENSIONS
ORDERING INFORMATION
Approximate Coil Weight: .74 lbs (.33 kg)
OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 3/4 NPTF Ports
Buna, Override 0K S #12 SAE Ports
Viton, Override VK
Buna, Screen A0
Viton, Screen W0
Buna, Screen, Override B2
Viton, Screen, Override V2
VOLTAGE
06 6 VDC
12 12 VDC
Note: use screen only if ow 24 24 VDC
direction is from (1) to (2) 36 36 VDC
48 48 VDC
25 24 VAC
11 120 VAC
22 220 VAC
“D” COIL TERMINATION 44 440 VAC
(All DC Except as Noted)
IMMERSION PROOF “D” TYPE
DL Double Lead SS Single Spade IA “I” Coil AMP Superseal - Integral
DT Deutsch on Leads DT04-2P DS Double Spade ID “I” Coil Deutsch - Integral DT04-2P
ML Metri-Pack on Leads HC DIN 43650 (Hirschmann) - (AC&DC) IJ “I” Coil AMP Jr. Timer - Integral
PL Packard on Leads CL Conduit Lead - (AC Only) IM “I” Coil Metri-Pack - Integral
WL Weatherpack on Leads DI Deutsch - Integral DT04-2P
SJ-S2D – – – –
DIMENSIONS
ORDERING INFORMATION
Approximate Coil Weight: .74 lbs (.33 kg)
OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 3/4 NPTF Ports
Buna, Override 0K S #12 SAE Ports
Viton, Override VK
Buna, Screen A0
Viton, Screen W0
Buna, Screen, Override B2
Viton, Screen, Override V2
VOLTAGE
06 6 VDC
12 12 VDC
Note: use screen only if ow 24 24 VDC
direction is from (1) to (2) 36 36 VDC
48 48 VDC
25 24 VAC
11 120 VAC
22 220 VAC
“D” COIL TERMINATION 44 440 VAC
(All DC Except as Noted)
IMMERSION PROOF “D” TYPE
DL Double Lead SS Single Spade IA “I” Coil AMP Superseal - Integral
DT Deutsch on Leads DT04-2P DS Double Spade ID “I” Coil Deutsch - Integral DT04-2P
ML Metri-Pack on Leads HC DIN 43650 (Hirschmann) - (AC&DC) IJ “I” Coil AMP Jr. Timer - Integral
PL Packard on Leads CL Conduit Lead - (AC Only) IM “I” Coil Metri-Pack - Integral
WL Weatherpack on Leads DI Deutsch - Integral DT04-2P
SJ-S2D – – – –