SOLENOID OPERATED DIRECTIONAL CONTROLS
4484 Boeing Drive Rockford, IL 61109 • USA • Phone +1 (815) 397-6628 • Fax +1 (815) 397-2526
mail: delta@delta-power.com • www.delta-power.com
WARNING: the specications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specic application should not be undertaken
without independent study, evaluation, and testing for suitability.
W 44 / 12-2022
SJ-S2A PILOT OPERATED POPPET, 2 WAY NORMALLY CLOSED
DESCRIPTION
16 size, 1 5/16-12 thread, “SIXTEEN” series, solenoid operated, 2 way normally closed, pilot operated poppet
valve with reverse ow de-energized.
OPERATION
When de-energized the SJ-S2A blocks ow from (1) to (2) and allows reverse ow from (2) to (1). When energized
the valve allows ow from (1) to (2) and restricted ow from (2) to (1).
OPERATION OF MANUAL OVERRIDE OPTION: to override, pull knob out. On the detented version, after
pulling knob out twist 180 degrees and release. The valve will remain in that position.
FEATURES
• Hardened parts for long life.
• Efcient wet-armature construction.
• Cartridges are voltage interchangeable.
• Manual override option.
• Industry common cavity.
• Unitized, molded coil design.
• Continuous duty rated solenoid.
• Optional coil voltages and terminations.
• Optional “I” Coil: Weatherproof, Thermal Shock, Immersion Safe.
Nominal Flow 30 GPM (114 LPM)
Rated Operating Pressure 3500 PSI (241 bar)
Typical Internal Leakage (150 SSU) 0-10 drops/min
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Weight .72 lbs (.32 kg)
Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque Requirements 90 ft-lbs (122 Nm)
Coil Nut Torque Requirements 4-6 ft-lbs (5.4-8.1 Nm)
Cavity SIXTEEN 2W
Cavity Tools Kit
(form tool, reamer, tap) 40500017
Seal Kit 21191400
VALVE SPECIFICATIONS
Actual Test Data (Cartridge Only)
0
50
100
150
200
250
0 10 20 30 40
Flow (GPM)
0
5
10
15
0 25 50 75 100 125 150
Flow (LPM)
Port 1 to 2 (eng) Port 2 to 1 (eng) Port 2 to 1 (de-eng)
Pressure Drop (bar)
Pressure Drop (PSI)
PERFORMANCE
HYDRAULIC SYMBOL
2
1
SOLENOID OPERATED DIRECTIONAL CONTROLS
4484 Boeing Drive Rockford, IL 61109 • USA • Phone +1 (815) 397-6628 • Fax +1 (815) 397-2526
mail: delta@delta-power.com • www.delta-power.com
WARNING: the specications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specic application should not be undertaken
without independent study, evaluation, and testing for suitability.
W 44/ 12-2022
DIMENSIONS
ORDERING INFORMATION
Approximate Coil Weight: .74 lbs (.33 kg)
OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 3/4 NPT Ports
Buna, Override, Detent 0M S #12 SAE Ports
Viton, Override, Detent VM
Buna, Override, Non-Detent B1
Viton, Override, Non-Detent V1
VOLTAGE
06 6 VDC
12 12 VDC
24 24 VDC
36 36 VDC
48 48 VDC
25 24 VAC
11 120 VAC
22 220 VAC
“D” COIL TERMINATION 44 440 VAC
(All DC Except as Noted)
IMMERSION PROOF “D” TYPE
DL Double Lead SS Single Spade IA “I” Coil AMP Superseal - Integral
DT Deutsch on Leads DT04-2P DS Double Spade ID “I” Coil Deutsch - Integral DT04-2P
ML Metri-Pack on Leads HC DIN 43650 (Hirschmann) - (AC&DC) IJ “I” Coil AMP Jr. Timer - Integral
PL Packard on Leads CL Conduit Lead - (AC Only) IM “I” Coil Metri-Pack - Integral
WL Weatherpack on Leads DI Deutsch - Integral DT04-2P
SJ-S2A – – – –
DELTA POWER CO
2.59
[65.8]
3.59
[91.1]
1.80
[45.8]
1.56
[39.6]
1.85
[47.1]
.75
[19.1]
HEX NUT
1 5/16-12 UN
2A THREAD
1.63 [41.3] HEX
MANUAL OVERRIDE
STANDARD
SEE COIL DATA
FOR TERMINATIONS
.48
[12.2]
7/16-20 UNF
2A THREAD
DELTA POWER C0
2.56
[65.0]
3.00
[76.2]
.96
[24.4]
2.25
[57.2]
3.00
[76.2]
2.44
[61.9]
1.22
[30.9]
.28
[7.1]
2.00
[50.8]
1.00
[25.4]
#12 SAE PORTS
2X
.41 [10.3] DIA.
MTG. SLOTS
2X
BODY WEIGHT: 1.29 lbs (.58 kg)
