SOLENOID OPERATED DIRECTIONAL CONTROLS
4484 Boeing Drive Rockford, IL 61109 • USA • Phone +1 (815) 397-6628 • Fax +1 (815) 397-2526
mail: delta@delta-power.com • www.delta-power.com
WARNING: the specications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specic application should not be undertaken
without independent study, evaluation, and testing for suitability.
W 44/ 12-2022
PP-S3X DIRECT ACTING SPOOL, 3 WAY 2 POSITION, SELECTOR
DESCRIPTION
8 size, 3/4-16 thread, “Power” series, solenoid operated, 3 way 2 position, selector spool valve.
OPERATION
When de-energized the PP-S3X allows ow from (2) to (3) and blocks ow at port (1). When energized the valve
allows ow from (2) to (1) and blocks ow at port (3).
OPERATION OF MANUAL OVERRIDE OPTION: to override, pull knob out. On the detented version, after
pulling knob out twist 180 degrees and release. The valve will remain in that position.
FEATURES
• Hardened parts for long life.
• Efcient wet-armature construction.
• Cartridges are voltage interchangeable.
• Manual override option.
• Industry common cavity.
• Unitized, molded coil design.
• Continuous duty rated solenoid.
• Optional coil voltages and terminations.
• Optional “I” Coil: Weatherproof, Thermal Shock, Immersion Safe.
Nominal Flow 3 GPM (11 LPM)
Rated Operating Pressure 3000 PSI (207 bar)
Typical Internal Leakage (150 SSU) 5 cu in/min (82 ml/min)
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Weight .23 lbs (.10 kg)
Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque Requirements 25 ft-lbs (34 Nm)
Coil Nut Torque Requirements 4-6 ft-lbs (5.4-8.1 Nm)
Cavity POWER 3W
Cavity Tools Kit
(form tool, reamer, tap) 40500024
Seal Kit 21191105
0
50
100
150
20 4 6
Flow (GPM)
0
5
10
0 5 10 15 20
Pressure Drop (PSI)
Flow (LPM)
Pressure Drop (bar)
Port 1 to 2 (eng) Port 2 to 3 (de-eng)
Actual Test Data (Cartridge Only)
VALVE SPECIFICATIONS
Operational shift limit 3 GPM (11 LPM) from port (2).
Not recommended for port (3) inlet cavity.
For shifted ow performance consult chart.
PERFORMANCE
HYDRAULIC SYMBOL
3
1
2
SOLENOID OPERATED DIRECTIONAL CONTROLS
4484 Boeing Drive Rockford, IL 61109 • USA • Phone +1 (815) 397-6628 • Fax +1 (815) 397-2526
mail: delta@delta-power.com • www.delta-power.com
WARNING: the specications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specic application should not be undertaken
without independent study, evaluation, and testing for suitability.
W 44 / 12-2022
DIMENSIONS
ORDERING INFORMATION
Approximate Coil Weight: .42 lbs (.19 kg)
OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4 NPTF Ports
Buna, Override, Detent 0M S #6 SAE Ports
Viton, Override, Detent VM
Buna, Screen A0
Viton, Screen W0
Buna, Override, Nondetent B1
Buna, Override, Nondetent V1
VOLTAGE
Buna, Screen, Override, Nondetent B3 06 6 VDC
Viton, Screen, Override, Nondetent V3 12 12 VDC
Buna, Screen, Override, Detent B4 24 24 VDC
Viton, Screen, Override, Detent V4 36 36 VDC
48 48 VDC
Note: use screen only if ow 25 24 VAC
direction is from (1) to (2) 11 120 VAC
22 220 VAC
“P” COIL TERMINATION 44 440 VAC
(All DC Except as Noted)
IMMERSION PROOF “P” TYPE
DL Double Lead SS Single Spade IA “I” Coil AMP Superseal - Integral
DT Deutsch on Leads DT04-2P DS Double Spade ID “I” Coil Deutsch - Integral DT04-2P
ML Metri-Pack on Leads HC DIN 43650 (Hirschmann) - (AC&DC) IJ “I” Coil AMP Jr. Timer - Integral
PL Packard on Leads CL Conduit Lead - (AC Only) IM “I” Coil Metri-Pack - Integral
WL Weatherpack on Leads DI Deutsch - Integral DT04-2P
PP-S3X – – – –
SEE COIL DATA
FOR TERMINATIONS
.87 [22.1] HEX
3/4-16 UNF 2A
THREAD
2.90
[73.6]
2.13
[54.2]
1.25
[31.7]
1.54
[39.1]
.75
[19.1]
HEX NUT
1.62
[41.2]
DELTA POWER CO.
STANDARD
MANUAL OVERRIDE
1.72
[43.6]
MINIMUM .406 DIAMETER PREDRILL 1.750 DEPTH
REQUIRED.
SOLENOID OPERATED DIRECTIONAL CONTROLS
Page SD119
Via Malavolti, 36 • 41122 Modena • ITALY • Phone +39 (059) 254895 • Fax +39 (059) 253512
mail: tecnord@tecnord.com • www.tecnord.com
4484 Boeing Drive Rockford, IL 61109 • USA • Phone +1 (815) 397-6628 • Fax +1 (815) 397-2526
mail: delta@delta-power.com • www.delta-power.com
WARNING: the specications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specic application should not be undertaken
without independent study, evaluation, and testing for suitability.
W 18 / 2017
DIMENSIONS
ORDERING INFORMATION
Approximate Coil Weight: .42 lbs (.19 kg)
OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4 NPTF Ports
Buna, Override, Detent 0M S #6 SAE Ports
Viton, Override, Detent VM
Buna, Screen A0
Viton, Screen W0
Buna, Override, Nondetent B1
Buna, Override, Nondetent V1
VOLTAGE
Buna, Screen, Override, Nondetent B3 06 6 VDC
Viton, Screen, Override, Nondetent V3 12 12 VDC
Buna, Screen, Override, Detent B4 24 24 VDC
Viton, Screen, Override, Detent V4 36 36 VDC
48 48 VDC
Note: use screen only if ow 25 24 VAC
direction is from (1) to (2) 11 120 VAC
22 220 VAC
“P” COIL TERMINATION 44 440 VAC
(All DC Except as Noted)
IMMERSION PROOF “P” TYPE
DL Double Lead SS Single Spade IA “I” Coil AMP Superseal - Integral
DT Deutsch on Leads DT04-2P DS Double Spade ID “I” Coil Deutsch - Integral DT04-2P
ML Metri-Pack on Leads HC DIN 43650 (Hirschmann) - (AC&DC) IJ “I” Coil AMP Jr. Timer - Integral
PL Packard on Leads CL Conduit Lead - (AC Only) IM “I” Coil Metri-Pack - Integral
WL Weatherpack on Leads DI Deutsch - Integral DT04-2P
PP-S3X – – – –
SEE COIL DATA
FOR TERMINATIONS
.87 [22.1] HEX
3/4-16 UNF 2A
THREAD
2.90
[73.6]
2.13
[54.2]
1.25
[31.7]
1.54
[39.1]
.75
[19.1]
HEX NUT
1.62
[41.2]
DELTA POWER CO.
STANDARD
MANUAL OVERRIDE
1.72
[43.6]
MINIMUM .406 DIAMETER PREDRILL 1.750 DEPTH
REQUIRED.
SOLENOID OPERATED DIRECTIONAL CONTROLS
Delta Power Company
4484 Boeing Drive - Rockford, IL 61109
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone: (815) 397-6628 Fax: (815) 397-2526 E-mail: delta@delta-power.com
DIMENSIONS
ORDERING INFORMATION
PP-S3X - - - -
OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4 NPTF Ports
Buna, Override 0M S #6 SAE Ports
Viton, Override VM
Buna, Screen A0
Viton, Screen W0 VOLTAGE
Buna, Override, Non-detent B1 06 6 VDC
Viton, Override, Non-detent V1 12 12 VDC
Buna, Screen, Override, Non-detent B3 24 24 VDC
Buna, Screen, Override, Detent B4 36 36 VDC
Viton, Screen, Override, Non-detent V3 48 48 VDC
Viton, Screen, Override, Detent V4 25 24 VAC
11 120 VAC
22 220 VAC Note: Use screen only if flow direction
is from (1) to (2). 44 440 VAC
“P” COIL TERMINATION
(All DC Except as Noted)
IMMERSION PROOF “P” TYPE
DL Double Lead SS Single Spade IA
“I” Coil AMP Superseal - Integral
DT Deutsch on Leads DT04-2P DS Double Spade ID
“I” Coil Deutsch – Integral DT04-2P
ML Metri-Pack on Leads HC DIN 43650 (Hirschman) – (AC & DC) IJ
“I” Coil AMP Jr. Timer - Integral
PL Packard on Leads CL Conduit Lead – (AC Only) IM
“I” Coil Metri-Pack – Integral
WL Weatherpack on Leads DI Deutsch – Integral DT04-2P
Approximate Coil Weight: .42 lbs. (.19 kg.)
Page 145
