SOLENOID OPERATED DIRECTIONAL CONTROLS
4484 Boeing Drive Rockford, IL 61109 • USA • Phone +1 (815) 397-6628 • Fax +1 (815) 397-2526
mail: delta@delta-power.com • www.delta-power.com
WARNING: the specications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specic application should not be undertaken
without independent study, evaluation, and testing for suitability.
W 44/ 12-2022
PB-S2I DIRECT ACTING POPPET, 2 WAY, NORMALLY CLOSED, BIDIRECTIONAL
DESCRIPTION
8 size, 3/4-16 thread, “Power” series, solenoid operated, 2 way normally closed, bidirectional poppet valve.
OPERATION
When de-energized the PB-S2I blocks ow from (1) to (2) and from (2) to (1). When energized the valve allows
ow from (1) to (2) and from (2) to (1).
MANUAL OVERRIDE OPTION: to override, turn clockwise the manual override screw. To release, turn the
manual override screw counter-clockwise.
FEATURES
• Hardened parts for long life.
• Efcient wet-armature construction.
• Cartridges are voltage interchangeable.
• Industry common cavity.
• Unitized, molded coil design.
• Continuous duty rated solenoid.
• Optional coil voltages and terminations.
Nominal Flow 3 GPM (11 LPM)
Rated Operating Pressure 3600 PSI (250 bar)
Typical Internal Leakage 0-10 drops/min at 3600 PSI
(150 SSU) (250 bar)
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 210°F (-40° to 100°C)
BUNA seals
-4° to 250°F (-20° to 120°C)
VITON seals
Weight .29 lbs (.13 kg)
Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque Requirements 25 ft-lbs (34 Nm)
Coil Nut Torque Requirements 4-6 ft-lb (5.4-8.1 Nm)
Cavity POWER 2W
Cavity Tools Kit 40500005
Seal Kit Buna Kit: 64900222
Viton Kit:64900223
Actual Test Data (Cartridge Only)
PERFORMANCE HYDRAULIC SYMBOL
VALVE SPECIFICATIONS
Flow (GPM)
Pressure Drop (PSI)
De-Rating of Pressure vs. Folw
Flow (LPM)
Pressure Drop (bar)
Flow (GPM)
Pressure Drop (PSI)
Flow (LPM)
Pressure Drop (bar)
TECNORD
SERVOCOMANDI E REGOLAZIONE
For higher pressure and higher ow option
for this function see HPB-S2L
SOLENOID OPERATED DIRECTIONAL CONTROLS
4484 Boeing Drive Rockford, IL 61109 • USA • Phone +1 (815) 397-6628 • Fax +1 (815) 397-2526
mail: delta@delta-power.com • www.delta-power.com
WARNING: the specications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specic application should not be undertaken
without independent study, evaluation, and testing for suitability.
W 44/ 12-2022
DIMENSIONS
ORDERING INFORMATION
OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4 NPTF Ports
Buna Knob 0K S #6 SAE Ports
Viton Knob VK
VOLTAGE
06 6 VDC
12 12 VDC
24 24 VDC
36 36 VDC
48 48 VDC
25 24 VAC
11 120 VAC
22 220 VAC
44 440 VAC
“P” COIL TERMINATION
IMMERSION PROOF “I” COIL
TERMINATION
DL Double Lead SS Single Spade IA “I” Coil AMP Superseal - Integral
DT Deutsch on Leads DT04-2P DS Double Spade ID “I” Coil Deutsch - Integral DT04-2P
ML Metri-Pack on Leads HC DIN 43650 (Hirschmann) - (AC&DC) IJ “I” Coil AMP Jr. Timer - Integral
PL Packard on Leads CL Conduit Lead - (AC Only) IM “I” Coil Metri-Pack - Integral
WL Weatherpack on Leads DI Deutsch - Integral DT04-2P
For Optional Coil Terminations See Coil Section
PB - S2I – – – –
Approximate Coil Weight: .42 lbs (.19 kg)
TECNORD
SERVOCOMANDI E REGOLAZIONE
TECNORD
SERVOCOMANDI E REGOLAZIONE
“P” COIL IMMERSION PROOF “I” COIL
