SOLENOID OPERATED DIRECTIONAL CONTROLS
Delta Power Company
4484 Boeing Drive - Rockford, IL 61109
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone: (815) 397-6628 Fax: (815) 397-2526 E-mail: delta@delta-power.com
MA-S2G Direct Acting Spool, 2 Way, Normally Closed
DESCRIPTION
7 size, 5/8-18 thread, “Mini” series, solenoid operated, 2 way normally closed, spool valve.
OPERATION
When de-energized the MA-S2G blocks flow from (1) to (2) and (2) to (1). When energized the valve
allows flow from (1) to (2) and (2) to (1).
FEATURES
• Efficient wet-armature construction.
• Cartridges are voltage interchangeable.
• Industry common cavity.
• Unitized, molded coil design.
• Continuous duty rated solenoid.
• Optional coil voltages and terminations.
HYDRAULIC SYMBOL
For higher flow or pressure see HA-S2G.
PERFORMANCE
Actual Test Data (Cartridge Only)
VALVE SPECIFICATIONS
Nominal Flow 1.5 GPM (5.7 LPM)
Rated Operating Pressure 3000 PSI (207 bar)
Typical Internal Leakage
(150 SSU)
5 cu in/min (82 ml/min)
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating
Temperature Range
-40° to 250° F (-40° to 120° C)
Weight .12 lbs. (.05 kg)
Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque
Requirements
15 ft-lbs (20.3 Nm)
Coil Nut Torque
Requirements
3-5 ft-lbs (6.8 Nm)
Cavity MINI 2W
Cavity Form Tool (Finishing) 40500003
Seal Kit 21191002
0
50
100
150
00.511.52
Flow (GPM)
Pressure Drop (PSI)
0
5
10
05
Flow (LPM)
Pressure Drop (BAR)
Port 1 to 2 (eng) Port 2 to 1 (eng)
Page 64
SOLENOID OPERATED DIRECTIONAL CONTROLS
Delta Power Company
4484 Boeing Drive - Rockford, IL 61109
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone: (815) 397-6628 Fax: (815) 397-2526 E-mail: delta@delta-power.com
DIMENSIONS
ORDERING INFORMATION
MA-S2G -
- - -
OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4 NPTF Ports
Buna, Screen A0 S #6 SAE Ports
Viton, Screen W0
VOLTAGENote: Use screen only if flow direction
is from (1) to (2).
06 6 VDC
12 12 VDC
24 24 VDC
36 36 VDC
48 48 VDC
24 24 VAC
11 120 VAC
22 220 VAC
44 440 VAC
“M” COIL TERMINATION
(All DC Except as Noted)
DL Double Lead SS Single Spade
DT Deutsch on Leads DT04-2P DS Double Spade
ML Metri-Pack on Leads HC DIN 43650 (Hirschmann) – (AC&DC)
PL Parkard on Leads CL Conduit Lead - (AC Only)
WL Weatherpack on Leads
Approximate Coil Weight: .30 lbs/.14 kg.
Page 65
