SPECIAL APPLICATION VALVES
Delta Power Company
4484 Boeing Drive - Rockford, IL 61109
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone: (815) 397-6628 Fax: (815) 397-2526 E-mail: delta@delta-power.com
HB-S2L Bi-Directional, 2 Way 2 Position
DESCRIPTION
8 size, 3/4-16 thread, “Power” series, solenoid operated, 2 way bi-directional poppet valve.
OPERATION
When de-energized the HB-S2L blocks flow from (1) to (2) and (2) to (1). When energized the valve allows
flow from (1) to (2) and (2) to (1).
FEATURES
• Efficient wet-armature construction.
• Cartridges are voltage interchangeable.
• Industry common cavity.
• Unitized, molded coil design.
• Continuous duty rated solenoid.
• Optional coil voltages and terminations.
HYDRAULIC SYMBOL
Note: If low voltage is expected on the machine, 12 or 24 volt
systems will require the use of 10 volt or 20 volt coils respectively.
PERFORMANCE VALVE SPECIFICATIONS
Nominal Flow 11 GPM (40 LPM)
Max Operating Pressure 5000 PSI (350 bar)
Typical Internal Leakage 0 - 5 drops/min
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating
Temperature Range
-40° to 250° F (-40° to 120° C)
Weight .28 lbs. (.13 kg)
Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque
Requirements
30 ft-lbs (40.6 Nm)
Coil Nut Torque
Requirements
4-6 ft-lbs (5.4-8.1 Nm)
Cavity POWER 2W
Cavity Form Tool (Finishing) 40500005
Seal Kit 21191100