SPECIAL APPLICATION VALVES
Delta Power Company
4484 Boeing Drive - Rockford, IL 61109
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone: (815) 397-6628 Fax: (815) 397-2526 E-mail: delta@delta-power.com
HB-S2C Pilot Operated Poppet, 2 Way 2 Position, Normally Open
DESCRIPTION
8 size, 3/4-16 thread, “Power” series, solenoid operated, 2 way normally open, pilot operated poppet valve.
OPERATION
When de-energized the HB-S2C allows flow from (1) to (2) and restricted flow from (2) to (1). When
energized the valve blocks flow from (1) to (2) and allows flow from (2) to (1).
FEATURES
• Hardened parts for long life.
• Efficient wet-armature construction.
• Cartridges are voltage interchangeable.
• Industry common cavity.
• Unitized, molded coil design.
• Continuous duty rated solenoid.
• Optional coil voltages and terminations.
HYDRAULIC SYMBOL
Note: If low voltage is expected on the machine, 12 or 24 volt
systems will require the use of 10 volt or 20 volt coils respectively.
PERFORMANCE VALVE SPECIFICATIONS
Nominal Flow 8 GPM (30 LPM)
Max Operating Pressure 5000 PSI (350 bar)
Typical Internal Leakage 0-5 drops/min
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating
Temperature Range
-40° to 250° F (-40° to 120° C)
Weight .20 lbs. (.09 kg)
Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque
Requirements
30 ft-lbs (40.6 Nm)
Coil Nut Torque
Requirements
4-6 ft-lbs (5.4-8.1 Nm)
Cavity POWER 2W
Cavity Form Tool (Finishing) 40500005
Seal Kit 21191100
Page 590
SPECIAL APPLICATION VALVES
Delta Power Company
4484 Boeing Drive - Rockford, IL 61109
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone: (815) 397-6628 Fax: (815) 397-2526 E-mail: delta@delta-power.com
DIMENSIONS
ORDERING INFORMATION
HB-S2C - - - -
OPTIONS BODIES
Buna Standard 00 x Consult Factory
Viton Standard V0 WARNING
DO NOT USE ALUMINUM BODY
HIGH PRESSURE (5000 PSI) PRODUCT.
VOLTAGE
06 6 VDC
12 12 VDC
24 24 VDC
36 36 VDC
48 48 VDC
25 24 VAC
11 120 VAC
22 220 VAC
44 440 VAC
“P” COIL TERMINATION
(All DC Except as Noted)
DL Double Lead SS Single Spade
DT Deutsch on Leads DT04-2P DS Double Spade
ML Metri-Pack on Leads HC DIN 43650 (Hirschman) – (AC & DC)
PL Packard on Leads CL Conduit Lead – (AC Only)
WL Weatherpack on Leads DI Deutsch – Integral DT04-2P
Approximate Coil Weight: .42 lbs. (.19 kg.)
Page 591
