SOLENOID OPERATED DIRECTIONAL CONTROLS
Delta Power Company
4484 Boeing Drive - Rockford, IL 61109
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone: (815) 397-6628 Fax: (815) 397-2526 E-mail: delta@delta-power.com
HA-S2P Poppet, 2 Way, Normally Closed
DESCRIPTION
“High Pressure” 7 size, 5/8-18 thread, “Mini” series, solenoid operated, 2 way normally closed, poppet
valve.
OPERATION
When de-energized the HA-S2P blocks flow from (1) to (2). When energized the valve allows flow from (1)
to (2).
FEATURES
• Hardened parts for long life.
• Efficient wet-armature construction.
• Cartridges are voltage interchangeable.
• Industry common cavity.
• Unitized, molded coil design.
• Continuous duty rated solenoid.
• Optional coil voltages and terminations.
HYDRAULIC SYMBOL
Great for pilot control, low leakage.
Flow from port (2) to port (1) will happen once
pressure is between 1000 and 2000 PSI
PERFORMANCE
Actual Test Data (Cartridge Only)
VALVE SPECIFICATIONS
Nominal Flow .10 GPM (.38 LPM)
Rated Operating Pressure 5000 PSI (350 bar)
Typical Internal Leakage
(150 SSU)
0-10 drops/min
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating
Temperature Range
-40° to 250° F (-40° to 120° C)
Weight .18 lbs. (.08 kg)
Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque
Requirements
15 ft-lbs (20.3 Nm)
Coil Nut Torque
Requirements
3-5 ft-lbs (4.1-6.8 Nm)
Cavity SPECIAL
Cavity Form Tool (Finishing) 40500058
Seal Kit 21191000
0
50
100
150
200
250
00.050.10.15
Flow (GPM)
Pressure (PSI)
0
2
4
6
8
10
12
14
16
0 0.1 0.2 0.3 0.4 0.5
Flow (LPM)
Pressure (BAR)
Port 1 to 2 Eng
Page 5N
SOLENOID OPERATED DIRECTIONAL CONTROLS
Delta Power Company
4484 Boeing Drive - Rockford, IL 61109
WARNING: The specifications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described
(herein). Any specific application should not be undertaken without independent study, evaluation, and testing for suitability.
Phone: (815) 397-6628 Fax: (815) 397-2526 E-mail: delta@delta-power.com
DIMENSIONS
HA-S2P - - - -
OPTIONS
BODIES
Buna Standard 00
Blank
Without Body
WARNING
DO NOT USE ALUMINUM
Viton Standard V0 S #4 SAE Ports HIGH PRESSURE (5000 PSI) PRODUCT
VOLTAGE
06 6 VDC
12 12 VDC
24 24 VDC
“M” COIL TERMINATION 36 36 VDC
(All DC Except as Noted)
48 48 VDC
Double Lead DL 25 24 VAC
Deutsch on Leads DT04-2P DT 11 120 VAC
Metri-Pack on Leads ML 22 220 VAC
Packard on Leads PL 44 440 VAC
Weatherpack on Leads WL
Single Spade SS
Double Spade DS
DIN 43650 (Hirschmann) – (AC&DC) HC
Conduit Lead – (AC only) CL
Approximate Coil Weight: .30 lbs/.14 kg.
Page 6N
