SOLENOID OPERATED DIRECTIONAL CONTROLS
4484 Boeing Drive Rockford, IL 61109 • USA • Phone +1 (815) 397-6628 • Fax +1 (815) 397-2526
mail: delta@delta-power.com • www.delta-power.com
WARNING: the specications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specic application should not be undertaken
without independent study, evaluation, and testing for suitability.
W 44/ 12-2022
DG-S4A DIRECT ACTING SPOOL, 4 WAY 2 POSITION
DESCRIPTION
10 size, 7/8-14 thread, “Delta” series, solenoid operated, 4 way 2 position, side ow spool valve.
OPERATION
When de-energized the DG-S4A allows ow between (1) to (4) and (2) to (3). When energized the valve allows
ow between (2) to (1) and (3) to (4).
OPERATION OF MANUAL OVERRIDE OPTION: to override, pull knob out. On the detented version, after
pulling knob out twist 180 degrees and release. The valve will remain in that position..
FEATURES
Hardened parts for long life.
Efcient wet-armature construction.
Cartridges are voltage interchangeable.
Manual override option.
Industry common cavity.
Unitized, molded coil design.
Continuous duty rated solenoid.
Optional coil voltages and terminations.
Optional “I” Coil: Weatherproof, Thermal Shock, Immersion Safe.
Nominal Flow 10 GPM (38 LPM)
Rated Operating Pressure 3500 PSI (241 bar) per path
Typical Internal Leakage (150 SSU) 5 cu in/min (82 ml/min)
Viscosity Range 36 to 3000 SSU (3 to 647 cSt)
Filtration ISO 18/16/13
Media Operating Temp. Range -40° to 250°F (-40° to 120°C)
Weight .32 lbs (.15 kg)
Operating Fluid Media General Purpose Hydraulic Fluid
Cartridge Torque Requirements 30 ft-lbs (40.6 Nm)
Coil Nut Torque Requirements 4-6 ft-lbs (5.4-8.1 Nm)
Cavity DELTA 4W
Cavity Tools Kit
(form tool, reamer, tap) 40500002
Seal Kit 21191214
0
50
100
150
200
0 2 4 6 8 10
Flow (GPM)
0
5
10
0 5
Pressure Drop (PSI)
10 15 20 25 30 35
0 5 10 15 20 25 30 35
Flow (LPM)
Pressure Drop (bar)
Port 2 to 1 (eng) Port 3 to 4 (eng)
0
50
100
0
150
2 4 6 8 10
Flow (GPM)
0
5
10
Pressure Drop (PSI)
Pressure Drop (bar)
Flow (LPM)
Port 1 to 4 (de-eng) Port 2 to 3 (de-eng)
Actual Test Data (Cartridge Only)
PERFORMANCE HYDRAULIC SYMBOL
VALVE SPECIFICATIONS
For higher pressures see HG-S4A.
4
1
2
3
SOLENOID OPERATED DIRECTIONAL CONTROLS
4484 Boeing Drive Rockford, IL 61109 • USA • Phone +1 (815) 397-6628 • Fax +1 (815) 397-2526
mail: delta@delta-power.com • www.delta-power.com
WARNING: the specications/application data shown in our catalogs and data sheets are intended only as a general guide for the product described (herein). Any specic application should not be undertaken
without independent study, evaluation, and testing for suitability.
W 44/ 12-2022
DIMENSIONS
ORDERING INFORMATION
Approximate Coil Weight: .74 lbs (.33 kg)
OPTIONS BODIES
Buna Standard 00 Blank Without Body
Viton Standard V0 N 1/4 NPTF Ports
Buna, Override, Detent 0M S #6 SAE Ports
Viton, Override, Detent VM
Buna, Override, Non-detent B1
Viton, Override, Non-detent V1
VOLTAGE
06 6 VDC
12 12 VDC
24 24 VDC
36 36 VDC
48 48 VDC
25 24 VAC
11 120 VAC
22 220 VAC
44 440 VAC
“D” COIL TERMINATION
(All DC Except as Noted)
IMMERSION PROOF “D” TYPE
DL Double Lead SS Single Spade IA “I” Coil AMP Superseal - Integral
DT Deutsch on Leads DT04-2P DS Double Spade ID “I” Coil - Deutsch - Integral DT04-2P
ML Metri-Pack on Leads HC DIN 43650 (Hirschmann) - (AC&DC) IJ “I” Coil AMP Jr. Timer - Integral
PL Packard on Leads CL Conduit Lead - (AC Only) IM “I” Coil - Metri-Pack - Integral
WL Weatherpack on Leads DI Deutsch - Integral DT04-2P
DG-S4A – – – –
Approximate Coil Weight: .74 lbs (.33 kg)
DELTA POWER
1.56
[39.6]
1.83
[46.6]
.75
[19.1]
HEX NUT
3.35
[85.1]
2.31
[58.8]
2.44
[61.9]
.22
[5.6]
1.00 [25.4] HEX
7/8-14 UNF-2A
7/16-20 UNF-2A
THREAD
MANUAL OVERRIDE
STANDARD
SEE COIL
DATA FOR
TERMINATIONS
DELTA POWER
1.56
[39.6]
1.50
[38.1]
.81
[20.6]
2.27
[57.8]
.63
[15.9]
2.00
[50.8]
3.25
[82.6]
1.38
[34.9]
2.88
[73.0]
2.50
[63.5]
2.25
[57.2]
1.25
[31.8]
.13
[3.2]
.28 [7.1] DIA.
MTG. SLOTS
2X
#6 SAE PORTS
4X
BODY WEIGHT: .99 lbs (.45 kg)