For more than 40 years, Danfoss has been developing
state-of-the-art components and systems for mobile
machinery used in off-highway operations around the
world. We have become a preferred supplier by
offering the best of what really matters: The hardware
inside your vehicle application. H1 - our new
generation of servo-controlled hydrostatic pumps - is
no exception.
The H1 range is built around an advanced control and
available in a wide range of displacements. It is
designed for quality and reliability and offers
expanded functionality, greater total efficiency, and
easy installation.
All H1 control and sensor options are PLUS+1
®
Compliant. PLUS+1 allows you to rapidly develop and
customize electronic machine control. It opens up the
future by combining machine controls and
diagnostics in an integrated operating network.
Features
Designed for quality and reliability
•
One design concept
•
Single piece swash plate
•
Integrated auxiliary pad
Installation and packaging benefits
•
Length optimized pump
•
Minimum one clean side
•
Higher corner HP/package size ratio
•
Standardized connector interface
•
Expanded functionality through PLUS
+1
®
•
High strength mounting flange
Control options
•
Electro-hydraulic control options
include:
Electrical Displacement Control
(EDC)
Forward-Neutral-Reverse (FNR)
Non-Feedback Proportional Electric
(NFPE)
•
Manual Displacement Control (MDC)
•
Hydraulic Displacement Control (HDC)
•
Common control across entire family
Expanded functionality
•
Full compliment of diagnostic ports
including case pressure
•
PLUS+1 Compliant control and sensor
options
•
Control Cut Off (CCO) valve
•
Integral brake control valve
Greater total efficiency
•
Minimized control losses
•
Lower control pressure for less power
consumption
•
Reduced charge pressure rise rate
between idle and high idle
Data Sheet
Variable Displacement Pump
H1 60/68 Tandem
©
Danfoss | August 2021 AI175386484409en-000301 | 1