www.sunhydraulics.com ©2019 Sun Hydraulics 3
CONFIGURATIONS
747
Low- or high-power coils
DIN or Deutsch connector
12, 14, 24, or 28 Vdc
115, 230 Vac
With or without TVS diode
740
X * *
74*
Hazardous location coils
Explosion-proof
CSA, ATEX, IECEx certied
12, 24 Vdc
115, 230 Vac
See individual coil data sheets for
full coil conguration.
Important Note:
When performing model code searches on www.sunhydraulics.com, do not
include setting(s). When ordering, no spaces or dashes are used.
COMPATIBLE COILS
BASE MODEL CODE CONFIGURATIONS
VALVE
D M B *
‒
COIL
COIL TYPE
Directional
Spool type
3-way
Series 0
N = Buna-N
V = Viton
A = Normally open 1 to 2, Closed 2 to 3
N = Normally open 2 to 3, Closed 1 to 2
X = No manual override
* * * *
‒
CONFIGURATIONS
*
The DMBD 3000-psi (210-bar) valves use the low-power (17-W) coils; the DMBF 5000-psi (350-bar) valves use the high-power
(25-W) coils. Note that all DMB* valves can be used with the hazardous location coils.
Sun cartridges have a base seven-digit part number. Each
of the digits in the sequence has signicance as shown in
the model code explanation below. Available options and
modiers for specic cartridges, manifolds, and valve packages
are shown on the individual product pages and data sheets.
Not all modiers are applicable for every model.
MODEL CODE EXPLANATION
High-Power (25-W) & Low-Power (17-W) Coils
D
F
= 3000 psi (210 bar)
= 5000 psi (350 bar)
Voltage
DIN 43650 Form A
(IP65/IP67)
Deutsch DT04-2P
(IP69K)
Resistance @20°C (ohms) ±10%
(with diode**)
TVS Diode (Nominal)
Breakdown Voltage
(with diode*)
High-Power Low-Power High-Power Low-Power High-Power Low-Power
12 Vdc 740-212 740-212L 740-912 740-912L 5.8 8.5 68 Vdc
14 Vdc 740-214 740-214L 740-914 740-914L 7.8 11.5 68 Vdc
24 Vdc 740-224 740-224L 740-924 740-924L 23.0 33.9 68 Vdc
28 Vdc 740-228 740-228L 740-928 740-928L 31.4 46.1 68 Vdc
115 Vac 740-211 740-211L N/A N/A 416 612 250 Vac
230 Vac 740-223 740-223L N/A N/A 1686 2479 400 Vac
** Above model codes are shown without transient voltage suppression (TVS) diodes. To order 740 Series coils with a TVS
diode, append model code with “D” (Example: 740-212LD).
Voltage
M20 x 1.5
180°
M20 x 1.5
90°
1/2” NPT
180°
1/2” NPT 90°
Wattage
@ 20°C
Circuitry
12 Vdc 747-JM12BD 747-JM12CD 747-JN12BD 747-JN12CD 29.6 W With diode
24 Vdc 747-JM24BD 747-JM24CD 747-JN24BD 747-JN24CD 29.9 W With diode
115 Vac 747-JM11BD 747-JM11CD 747-JN11BD 747-JN11CD 29.7 W Rectied
230 Vac 747-JM23BD 747-JM23CD 747-JN23BD 747-JN23CD 28.9 W Rectied
Hazardous Location, Explosion-Proof (30-W) Coils