SV - Solenoid Valves
SV - 30
Solenoid Valves Catalog
11141717 • Rev BB • May 2015
PERFORMANCE CURVES
APPLICATIONS
OPERATION
SPECIFICATIONS SCHEMATIC
203 14
11 68
87 6
458
29 2
00
psi bar
2.6 5.3 10.6 13.2 18.5
US gal/min
50403020100
l/min
33 cSt [154 SUS] hyd.oil @ 38°C [100° F]
Pressure drop
7060
15.9
12174
145 10
7.9
De-energized
1to2
Energized
2to1
This is a normally-closed, pilot-operated, poppet-style 10-size
solenoid valve. When de-energized, the SVP10-NC acts as a check
valve allowing ow from port 1 to port 2, and blocking ow from
port 2 to port 1 . When energized, the valve’s poppet is shifted and
allows ow from port 2 to port 1, and severely restricts from port 1
to port 2. This valve is available with an optional pull-type manual
override.
Rated pressure* 230 bar [3300 psi]**
Rated ow at 7 bar
[100 psi]
80 l/min
[21 US gal/min]
Leakage 6 drops/min @
Rated pressure
Weight 0.43 kg [0.95 lb]
Cavity SDC10-2
Standard Coil M16 26 Watt
Robust Coil R16 20 Watt
Robust Nut P/N 173804910
(no coil O-rings needed)
SVP10-NC
2-Way Poppet
SVP10-NC
The SVP10-NC is designed to function as load holding or blocking
valve in applications where low internal leakage is required. In load
holding applications, the circuit should be designed so that the
de-energized state is the position that is holding the load. This valve
can operate at an inlet pressure of 315 bar on port 2 for 250,000
cycles.
1
2
Shown with Standard Coil,
Deutsch Connector
* Rated Pressure based on NFPA fatigue test standards (at 1 Million Cycles).
** See 315 bar pressure rating note on page 10.
SV - Solenoid Valves
SV - 31
Solenoid Valves Catalog
11141717 • Rev BB • May 2015
ORDERING INFORMATION
DIMENSIONS
EXAMPLE CIRCUITS
77.0 [3.03]
33.0 [1.30]
5.0 [0.20]
COIL NOT SHOWNFOR CLARITY
INSTALLO-RING (2) PLCS AS SHOWN
24 mm
9-11N·m
[6-8 lbf·ft]
Coil NutKit P/N 17400021
27 mm
45-50 N·m
[33-37 lbf·ft]
7/8-14 UNF-2A
2
1
Standard
(Includes O-rings)
2-Way Poppet
SVP10-NC
On/O Motor Circuit
SVP10-NC
