SV - Solenoid Valves
SV - 28
Solenoid Valves Catalog
11141717 • Rev BB • May 2015
PERFORMANCE CURVES
APPLICATIONS
OPERATION
SPECIFICATIONS SCHEMATIC
145 10
11 68
87 6
458
29 2
00
2to1
1to2
psi
bar
1.3 2.6 4 5.3 6.6 7.9
2520151050
l/min
33 cSt [154 SUS] hyd.oil @ 38°C [100° F]
30
De-energized
Energized
This is a normally-closed, pilot-operated, poppet-style 08-size solenoid
valve. When de-energized, the SVP08-NC acts as a check valve allowing
ow from port 1 to port 2, and blocking ow from port 2 to port 1 . When
energized, the valve’s poppet is shifted and blocks ow from port 2 to
port 1, and severely restricts from port 1 to port 2. This valve is available
with an optional pull-type manual override.
Rated pressure* 230 bar [3300 psi]**
Maximum ow at
rated pressure
35 l/min
[9 US gal/min]
Leakage 6 drops/min @
Rated pressure
Weight 0.23 kg [0.51 lb]
Cavity SDC08-2
Standard Coil M13 20 Watt
Robust Coil R13 16 Watt
Robust Nut P/N 173800539
(no coil O-rings needed)
2-Way Poppet
SVP08-NC
The SVP08-NC is designed to function as load holding or blocking valve
in applications where low internal leakage is required. In load holding
applications, the circuit should be designed so that the de-energized
state is the position that is holding the load. This valve can operate at an
inlet pressure of 315 bar on port 2 for 600,000 cycles.
Shown with Robust Coil,
Deutsch Connector
* Rated Pressure based on NFPA fatigue test standards (at 1 Million Cycles).
** See 315 bar pressure rating note on page 10.
SVP08-NC