SV - Solenoid Valves

SV - 160

Solenoid Valves Catalog

11141717 • Rev CB • March 2018

PERFORMANCE CURVES

APPLICATIONS

OPERATION

SPECIFICATIONS SCHEMATIC

4 Way, 2 Position Spool

SV15-24-02

Rated Pressure* 210 bar [3045 psi]**

Maximum Rated Flow at 7 bar

[100 psi]

60 l/min

[16 US gal/min]

Weight including coil 0.95 kg [2.09 lbs]

Cavity NCS 12/4

Coil M19-33W

Diode (Optional) Unidirectional

Shown with Standard Coil,

Deutsch Connector

* Rated Pressure based on NFPA fatigue test standards (at 1 Million Cycles).

** See 315 bar pressure rating note on page 10.

SV15-24-02

Solenoid Valve, Spool Type, 2-Position, 4-Way, High Flow (15-Size). When

de-energized, the SV15-24-02 blocks ow to all ports. When energized,

the spool shifts to allow ow from port 3 to port 4, and from port 2 to port

1. Follow the “Operating Envelope” limits to ensure shifting of the valve

during operation. The SV15 uses a 15 size cavity. This valve is a direct

replacement for EDH 12/4206 and uses a metric M33x2 cavity (NCS 12/4)

for high ow capability.

These valves are primarily used in mobile and industrial applications

for controlling the direction of the ow in a circuit, like motors or cylinders.

Solenoid spool-type valves are direct acting and respond quickly

to coil voltage input. Spool valves will have some leakage due to spool clearance,

so if your application requires no leakage at the working port(s), apply a low leakage

poppet valve(s), like PO check valve, counterbalance valve, etc., in addition to this solenoid valve. Use the optional screen

to help protect the actuator from large particles. This valve can operate with an inlet pressure of 315 bar on port 3 for

300,000 cycles. Port 1 may be pressurized to 150 bar, but is not intended for use as inlet (Tank only).

Table of Contents/Introduction

Quick Reference

Index