SV - Solenoid Valves
SV - Solenoid Valves
SV - 118 SV - 119
Solenoid Valves Catalog Solenoid Valves Catalog
11141717 • Rev BA • March 2015
11141717 • Rev BA • March 2015
PERFORMANCE CURVES
APPLICATIONS
OPERATION
ORDERING INFORMATION
DIMENSIONS
SPECIFICATIONS
EXAMPLE CIRCUITS
SCHEMATIC
3 Way, 2 Position Spool
SV15-23-04
Solenoid Valve, Spool Type, 2-Position, 3-Way, High Flow (15-Size). When
de-energized, the SV15-23-04 allows ow from port 3 to port 2, blocking port 1.
When energized, ports 2 and 1 are connected, blocking port 3. Port 1 may be
fully pressurized, but is not intended to be the inlet port. Follow the “Operating
Envelope” limits to ensure shifting of the valve during operation. This valve is a
direct replacement for EDH 12/3201 and uses a metric M33x2 cavity (NCS 12/3) for
high ow capability.
These spool-type valves are primarily used in mobile and industrial applications for
controlling the direction of the ow in a circuit like a single-acting cylinder, clutch,
brake, circuit selector valve, or pilot for a large directional spool valve. Solenoid
spool-type valves are direct acting and respond quickly to coil voltage input. Spool
valves will have some leakage due to spool clearance, so if your application requires
no leakage at the working port(s), apply a low leakage poppet valve(s), like PO check
valve, counterbalance valve, etc., in addition to this solenoid valve. This valve can
operate with an inlet pressure of 315 bar for 100,000 cycles. In case of inlet from
port 2 this value can be increased to 300,000 cycles.
Rated Pressure* 210 bar [3045 psi]**
Maximum Rated Flow at 7 bar
[100 psi]
50 l/min
[13 US gal/min]
Weight including coil 0.89 kg [1.96 lbs]
Cavity NCS 12/3
Coil M19-33W
Diode (Optional) Unidirectional
2
3
1
Shown with Standard Coil,
Deutsch Connector
* Rated Pressure based on NFPA fatigue test standards (at 1 Million Cycles).
** See 315 bar pressure rating note on page 10.
SV15-23-04
85.5
[3.37]
Ø38
63
3
[1.50]
[0.12]
[2.48]
1
2
M 33x2
COIL NOT SHOWN FOR CLARITY
INSTALL O-RING (2) PLCS AS SHOWN
38 mm
65-70 Nm [47-52 lbf*ft]
9-11 Nm
[6-8 lbf*ft]
C
oil Nut Kit P/N 173800968
30 mm
3
Uni-directional Motor Single Acting Cylinder
3 Way, 2 Position Spool
SV15-23-04
SV15-23-04
