SV - Solenoid Valves

SV - 184

Solenoid Valves Catalog

11141717 • Rev BB • May 2015

PERFORMANCE CURVES

APPLICATIONS

OPERATION

SPECIFICATIONS SCHEMATIC

Pressure drop

26 cSt [121 SUS] hyd.oil at 50°C [122 °F]

40302010

300

100

200

psi

bar

US gall/min

l/min

1) 3 to 4 S2 Energized,3 to 2 S1 Energized

2) 2 to 1 S2 Energized,4 to 1 S1 Energized

Solenoid Valve, Spool Type, 3-Position, 4-Way, 10-size. When de-energized, the SV10-

34-11 allows ow from port 4 to 1, blocking port 2 and 3. When coil S1 is energized,

the spool shifts to allow ow from port 3 to port 4, and from port 2 to 1. When coil S2 is

energized, the spool shifts to allow ow from port 3 to port 2, and from port 4 to port 1.

This valve comes standard with a one-direction, push-pin manual override. When the

manual override is pushed, the spool shifts following the logic of energizing S2. Follow

the “Operating Envelope” limits to ensure shifting of the valve during operation.

Rated pressure* 230 bar [3300 psi]**

Rated ow at 7 bar

[100 psi]

24 l/min

6 US gal/min]

Weight 0.81 kg [1.79 lb]

Cavity SDC10-4

Standard Coil M16 26 Watt

Robust Coil R16 20 Watt

Robust Nut P/N 173804910

(no coil O-rings needed)

SV10-34-11

4-Way, 3-Position Spool

These spool-type valves are primarily used in mobile and industrial applications for

controlling the direction of the ow in a circuit. Solenoid spool-type valves are direct

acting and respond quickly to coil voltage input. Spool valves will have some leakage

due to spool clearance, so if your application requires no leakage at the working port(s),

apply a low leakage poppet valve(s), like PO check valve, counterbalance valve, etc., in

addition to this solenoid valve. This valve can operate with an inlet pressure of 315 bar

on port 3 for 400,000 cycles. Port 1 may be pressurized to 210 bar, but is not intended

as inlet (Tank only).

Shown with Robust Coils.

Deutsch Connectors

* Rated Pressure based on NFPA fatigue test standards (at 1 Million Cycles).

** See 315 bar pressure rating note on page 10.

SV - Solenoid Valves

SV - 185

Solenoid Valves Catalog

11141717 • Rev BB • May 2015

ORDERING INFORMATION

DIMENSIONS

EXAMPLE CIRCUITS

24 mm

9-11 Nm [80-97 lbf•in]

27 mm

45-50 Nm [33-37 lbf•ft]

7/8-14UNF-2A

62.0

[2.44]

5.0

[0.20]

127.3

[5.01]

COIL NOT SHOWN FOR CLARITY

INSTALL O-RING (4) PLCS AS SHOWN

Ø26.5 [1.04]

Coil nut kit

P/N 17400031

Standard

(coil O-rings included)

Cushion Relief in Cylinder Application

SV10-34-11

4-Way, 3-Position Spool

11:

Schematic: 3P4W

34:

3 Position, 4 Way, Spool Type

- 34

12D -

- 00DE

Solenoid Valve, 10 Size Cavity

Coil Termination Standard Coil

Code

IP Rating Robust Coil

Code

IP Rating

Coil

00 - 00 -

Amp Junior AJ IP67 - -

Amp Junior with Diode AJD IP67 - -

AMP SuperSeal 1.5 AS IP67 AS IP69K

AMP SuperSeal with Diode ASD IP67 ASDB IP69K

Deutsch DE IP67 DE IP69K

Deutsch with Diode DED IP67 DEDB IP69K

Flying Leads FL IP65 FL IP69K

Flying Leads with Diode FLD IP65 FLDB IP69K

DIN 43650

DN IP65 - -

Metri-Pack 150 Type 2 - - M3 IP69K

Metri-Pack 150 with Diode - - M3DB IP69K

Coil Voltage Standard Coil

Code

Robust Coil

Code

Coil, with nut*

00 R00

10 VDC

10D R10D

12 VDC

12D R12D

20 VDC

20D R20D

24 VDC

24D R24D

110 VAC**

110A -

220 VAC**

220A -

Seal Code Material Seal Kits

B Buna-N 354001919

V Viton 354002019

* Standard coil – plastic nut and O-rings; R-coil – steel

nut P/N 173804910 (no coil O-rings needed)

** DIN only - external rectifier needed

Code Body and Ports Body Nomenclature

00 Cartridge Only No Body

6S #6 SAE, AL CP10-4-6S

8S #8 SAE, AL CP10-4-8S

S8S #8 SAE, Steel CP10-4-S8S

L3B 3/8 BSP, AL SDC10-4-L3B

L4B 1/2 BSP, AL SDC10-4-L4B

S4B 1/2 BSP, Steel CP10-4-S4B

SV10

Code Manual Override

Omit Push Pin (Standard)

PB Push Button

SPS

Screw Style

(Push-Type Valve)

OPS

Push Pin Nut for

Protection & Actuation

PAT Push and Twist

SV10-34-11