
SV - Solenoid Valves
SV - 154
Solenoid Valves Catalog
11141717 • Rev BB • May 2015
PERFORMANCE CURVES
APPLICATIONS
OPERATION
SPECIFICATIONS SCHEMATIC
1
Solenoid Valve, Spool Type, 2-Position, 4-Way, 10-Size. When de-energized, all
ports on the SV10-24-13 are open. When energized, the spool shifts allow from
port 3 to port 2, and from port 4 to port 1. Follow the “Operating Envelope” limits
to ensure shifting of the valve during operation.
Rated pressure* 230 bar [3300 psi]**
Rated ow at 7 bar
[100 psi]
21 l/min
[6 US gal/min]
Weight 0.45 kg [0.99 lb]
Cavity SDC10-4
Standard Coil M16 26 Watt
Robust Coil R16 20 Watt
Robust Nut P/N 173804910
(no coil O-rings needed)
SV10-24-13
4-Way, 2-Position Spool
These spool-type valves are primarily used in mobile and industrial
applications for connecting both sides of a motor (free-wheeling) or cylinder
to both the pressure and tank ports when not energized. Then, when energized,
the valve provides unidirectional ow to the motor or cylinder. Solenoid spool-type
valves are direct acting and respond quickly to coil voltage input. Spool valves
will have some leakage due to spool clearance, so if your application requires no
leakage at the working port(s), apply a low leakage poppet valve(s), like PO check
valve, counterbalance valve, etc., in addition to this solenoid valve. This valve can be
operated with an inlet pressure of 315 bar on port 3 for 400,000 cycles. Port 1 may be
pressurized to 210 bar, but is not intended as inlet (Tank only).
Shown with Standard Coil,
Deutsch Connector
* Rated Pressure based on NFPA fatigue test standards (at 1 Million Cycles).
** See 315 bar pressure rating note on page 10.
SV10-24-13