SV - Solenoid Valves
SV - 144
Solenoid Valves Catalog
11141717 • Rev BB • May 2015
PERFORMANCE CURVES
APPLICATIONS
OPERATION
SPECIFICATIONS SCHEMATIC
Pressure drop
26 cSt [121 SUS] hyd.oil at 50°C [122 °F]
0
642
40302010
0
300
100
20
0
ps
i
bar
20
15
10
5
8
10
US gall/mi
n
l/min
1
2
1) 2 to 1 De-energized
2) 3 to 4 De-energized
4
3
1
2
Solenoid Valve, Spool Type, 2-Position, 3-Way, 10-Size. When de-energized,
the SV10-24-05 allows ow from port 3 to port 4, and from port 2 to port 1.
When energized, all ports are blocked. Port 1 may be fully pressurized, but
is not intended to be the inlet port. Follow the “Operating Envelope” limits to
ensure shifting of the valve during operation.
Rated pressure* 230 bar [3300 psi]**
Rated ow at 7 bar
[100 psi]
25 l/min
[7 US gal/min]
Weight 0.45 kg [0.99 lb]
Cavity SDC10-4
Standard Coil M16 26 Watt
Robust Coil R16 20 Watt
Robust Nut P/N 173804910
(no coil O-rings needed)
SV10-24-05
4-Way, 2-Position Spool
These spool-type valves are primarily used in mobile and industrial
applications for controlling the direction of the ow in a circuit, like motors or
cylinders. Solenoid spool-type valves are direct acting and respond quickly
to coil voltage input. Spool valves will have some leakage due to spool
clearance, so if your application requires no leakage at the working port(s),
apply a low leakage poppet valve(s), like PO check valve, counterbalance
valve, etc., in addition to this solenoid valve.
This valve can operate with an inlet pressure of 315 bar on port 3 for 400,000
cycles. Port 1 may be pressurized to 210 bar, but is not intended as inlet
(Tank only).
Shown with Standard Coil,
Deutsch Connector
* Rated Pressure based on NFPA fatigue test standards (at 1 Million Cycles).
** See 315 bar pressure rating note on page 10.
SV10-24-05
SV - Solenoid Valves
SV - 145
Solenoid Valves Catalog
11141717 • Rev BB • May 2015
ORDERING INFORMATION
DIMENSIONS
EXAMPLE CIRCUITS
COIL NOT SHOWN FOR CLARITY
INSTALL O-RING (2) PLCS AS SHOWN
7/8-14 UNF-2A
27 mm
45-50 Nm [33-37 lbf*ft]
24 mm
9-11 Nm
[6-8 lbf*ft]
[0.2]
5.0
[3.03]
77.0
[2.44]
62.0
h
t
h
t
2
1
34
Ø26.5 [1.04]
Coil nut kit
P/N 17400021
Standard
(coil O-rings included)
SV10-24-05
4-Way, 2-Position Spool
SV10-24-05
