SV - Solenoid Valves
SV - 124
Solenoid Valves Catalog
11141717 • Rev BB • May 2015
PERFORMANCE CURVES
APPLICATIONS
OPERATION
SPECIFICATIONS SCHEMATIC
Pressure drop
33 cSt [154 SUS] hyd.oil @ 38°C [100°F]
3 to 4 to 2 to 1
Energized
3 to 2 to 4 to 1
De-energized
35
l/min
0714 21 28
US gal/min
9.2
7.45.53.71.8
barpsi
00
10145
290 20
30425
58040
4
3
1
2
Solenoid Valve, Spool Type, 2-Position, 4-Way, 10 size. When
de-energized, the SV10-24-01 allows ow from port 3 to port 2, and
from port 4 to port 1. When energized, the spool shifts to allow ow
from port 3 to port 4, and from port 2 to port 1. Follow the “Operating
Envelope” limits to ensure shifting of the valve during operation.
Rated pressure* 230 bar [3300 psi]**
Rated ow at 7 bar
[100 psi]
15 l/min
[4 US gal/min]
Weight 0.45 kg [0.99 lb]
Cavity SDC10-4
Standard Coil M16 26 Watt
Robust Coil R16 20 Watt
Robust Nut P/N 173804910
(no coil O-rings needed)
SV10-24-01
4-Way, 2-Position Spool
These spool-type valves are primarily used in mobile and industrial
applications for controlling the direction of the ow in a circuit, like
motors or cylinders. Can be used in combination to duplicate a four-way, three-position valve, creating an economical,
compact function. Solenoid spool-type valves are direct acting and respond quickly to coil voltage input. Spool valves
will have some leakage due to spool clearance, so if your application requires no leakage at the working port(s), apply
a low leakage poppet valve(s), like PO check valve, counterbalance valve, etc., in addition to this solenoid valve. Port 1
may be pressurized to 210 bar, but is not intended as inlet (Tank only).
* Rated Pressure based on NFPA fatigue test standards (at 1 Million Cycles).
** See 315 bar pressure rating note on page 10.
Shown with
Robust Coil
SV10-24-01
SV - Solenoid Valves
SV - 125
Solenoid Valves Catalog
11141717 • Rev BB • May 2015
ORDERING INFORMATION
DIMENSIONS
EXAMPLE CIRCUITS
60.0 [2.44]77.0 [3.03]
5.0 [0.20]
24 mm
9-11 N· m
[6-8 lbf·ft]
27 mm
45-50 N·m
[33-37 lbf·ft]
7/8-14 UNF-2A
CO IL NO T SHOWN FOR CLARITY
INSTALL O-RING (2) PL CS AS SHOWN
h
t
h
t
234
Ø26.5 [1.04]
Co il nut kit P/N 17400021
Standard
(coil O-rings included)
SV10-24-01
4-Way, 2-Position Spool
SV10-24-01
