SV - Solenoid Valves
SV - 116
Solenoid Valves Catalog
11141717 • Rev BB • May 2015
PERFORMANCE CURVES
APPLICATIONS
OPERATION
SPECIFICATIONS SCHEMATIC
Pressure drop
26 cSt [121 SUS] hyd.oil at 50°C [122 °F]
642
403020
0
300
100
200
psi
US gall/min
bar
20
15
10
5
l/min
10
810
1
2
1) 1 to 2 Energized
2) 3 to 2 De-energized
Solenoid Valve, Spool Type, 2-Position, 3-Way, 10-Size. When de-energized, the
SV10-23-04 allows ow from port 3 to port 2, blocking port 1. When energized,
ports 2 and 1 are connected, blocking port 3. Port 1 may be fully pressurized,
but is not intended to be the inlet port. Follow the “Operating Envelope” limits
to ensure shifting of the valve during operation.
Rated pressure* 230 bar [3300 psi]**
Rated ow at 7 bar
[100 psi]
20 l/min
[5 US gal/min]
Weight 0.42 kg [0.93 lb]
Cavity SDC10-3
Standard Coil M16 26 Watt
Robust Coil R16 20 Watt
Robust Nut P/N 173804910
(no coil O-rings needed)
SV10-23-04
3-Way, 2-Position Spool
These spool-type valves are primarily used in mobile and industrial applications
for controlling the direction of the ow in a circuit like a single-acting cylinder,
clutch, brake, circuit selector valve, or pilot for a large directional spool valve.
Solenoid spool-type valves are direct acting and respond quickly to coil voltage
input. Spool valves will have some leakage due to spool clearance, so if your
application requires no leakage at the working port(s), apply a low leakage
poppet valve(s), like PO check valve, counterbalance valve, etc., in addition
to this solenoid valve. This valve can be pressurized to 315 Bar on port 2 for
500,000 operating cycles.
2
3
1
* Rated Pressure based on NFPA fatigue test standards (at 1 Million Cycles).
** See 315 bar pressure rating note on page 10.
Shown with Robust Coil,
Deutsch Connector
Operating envelope
0
1000
2000
3000
4000
l/min
100
200
300
400
bar
US gall/mi
n
psi
5000
0
10 20 30 40
24
6000
68100
SV10-23-04
SV - Solenoid Valves
SV - 117
Solenoid Valves Catalog
11141717 • Rev BB • May 2015
ORDERING INFORMATION
DIMENSIONS
EXAMPLE CIRCUITS
27 mm
45-50 Nm [33-37 lbf*ft]
77.0 46.5
[3.03]
5
[0.2]
[1.83]
7/8-14 UNF-2A
COIL NOT SHOWN
FOR CLARITY
INSTALL O-RING (2) PLCS
AS SHOWN
9-11 Nm
[6-8 lbf*ft]
Coil nut kit
P/N 17400021
24 mm
h
t
h
t
23
1
Ø26.2 [1.04]
Standard
(coil O-rings included)
SV10-23-04
3-Way, 2-Position Spool
Single Acting Cylinder
Uni-directional Motor
SV10-23-04
