SV - Solenoid Valves
SV - 150
Solenoid Valves Catalog
11141717 • Rev BB • May 2015
PERFORMANCE CURVES
APPLICATIONS
OPERATION
SPECIFICATIONS SCHEMATIC
Pressure Drop
33 cSt [154 SUS] hyd.oil @ 38°C [100° F]
psi bar
20
290
232
174
16
58
4
0
8
0
12
116
l/min
348
24
0
24
81
8
0.5
61
6
1.11.6 4.84.22.13.73.2
12 1410
2.6
US gal/min
1) 3 to 2 to 4 to 1 Energized
2) 4 to 1 De-Energized
3) 2 to 1 De-Energized
1
2
3
3
1
4
2
Solenoid Valve, Spool Type, 2-Position, 4-Way, 08-size. When
de-energized, the SV08-24-08 allows ow from ports 2 and 4 to port 1,
while port 3 is blocked. When energized, the spool shifts to allow ow
from port 3 to 4, and from 2 to 1. Follow the “Operating Envelope” limits
to ensure shifting of the valve during operation.
Rated pressure* 230 bar [3300 psi]**
Rated ow at bar
[ psi]
24 l/min
[6 US gal/min]
Weight 0.45 kg [0.99 lb]
Cavity SDC08-4
Standard Coil M13 20 Watt
Robust Coil R13 16 Watt
Robust Nut P/N 173800539
(no coil O-rings needed)
SV08-24-08
4-Way, 2-Position Spool
These spool-type valves are primarily used in mobile and industrial
applications for connecting both sides of a motor (free-wheeling) or cylinder
to tank when not energized. Then, when energized, the valve provides unidirectional
ow to the motor or cylinder. Solenoid spool-type valves are direct acting and
respond quickly to coil voltage input. Spool valves will have some leakage due to
spool clearance, so if your application requires no leakage at the working port(s),
apply a low leakage poppet valve(s), like PO check valve, counterbalance valve, etc.,
in addition to this solenoid valve.
This valve can operate with an inlet pressure of 315 bar on port 3 for 500,000 cycles.
Port 1 may be pressurized to 210 bar, but is not intended for use as inlet (Tank only).
Shown with Robust Coil,
Metri-Pack Type 2 Connector
* Rated Pressure based on NFPA fatigue test standards (at 1 Million Cycles).
** See 315 bar pressure rating note on page 10.
SV08-24-08
SV - Solenoid Valves
SV - 151
Solenoid Valves Catalog
11141717 • Rev BB • May 2015
ORDERING INFORMATION
DIMENSIONS
EXAMPLE CIRCUITS
[2.12]
[Ø0.94]
[0.1]
[2.35]
Ø23.8
2.5
53.859.8
20 mm
4-6 Nm
[35-53 lbf*in
]
Coil Nut Kit
P/N 173800588
COIL NOT SHOWN
FOR CLARITY
INSTALL O-RING (2) PLCS
AS SHOWN
1
4
2
3
3/4-16 UNF-2A
35-40 Nm [26-30 lbf*ft]
24 mm
P108 aaaE
SV08-24-08
4-Way, 2-Position Spool
Free wheel on Uni-directional Motor
P
SV08-24-08
