SV - Solenoid Valves
SV - 138
Solenoid Valves Catalog
11141717 • Rev BB • May 2015
PERFORMANCE CURVES
APPLICATIONS
OPERATION
SPECIFICATIONS SCHEMATIC
Pressure drop
26 cSt [121 SUS] hyd.oil at 50°C [122 °F]
1
2
0
21
8642
0
300
10
0
20
0
psi
US gal/mi
n
bar
20
15
10
5
l/min
1) 3 to 4 Energized
2) 2 to 1 Energized
4
3
1
2
Solenoid Valve, Spool Type, 2-Position, 4-Way, 08 size. When de-energized, the
SV08-24-04 allows ow from port 3 to port 1, while ports 2 and 4 are blocked.
When energized, the spool shifts to allow ow from port 3 to port 4, and from
port 2 to port 1. Follow the “Operating Envelope” limits to ensure shifting of the
valve during operation.
Rated pressure* 230 bar [3300 psi]**
Rated ow at 7 bar
[100 psi]
8 l/min
[2 US gal/min]
Weight 0.31 kg [0.68 lb]
Cavity SDC08-4
Standard Coil M13 20 Watt
Robust Coil R13 16 Watt
Robust Nut P/N 173800539
(no coil O-rings needed)
SV08-24-04
4-Way, 2-Position Spool
These spool-type valves are primarily used in mobile and industrial applications
for controlling the direction of the ow in a circuit, like motors or cylinders. Can
be used in combination to duplicate a four-way, three-position valve, creating
an economical, compact function. Solenoid spool-type valves are direct
acting and respond quickly to coil voltage input. Spool valves will have some
leakage due to spool clearance, so if your application requires no leakage at
the working port(s), apply a low leakage poppet valve(s), like PO check valve,
counterbalance valve, etc., in addition to this solenoid valve. This valve can
operate with an inlet pressure of 315 bar on port 3 for 500,000 cycles. Port 1
may be pressurized to 210 bar, but is not intended for use as inlet (Tank only).
Shown with
Standard Coil,
Deutsch Connector
* Rated Pressure based on NFPA fatigue test standards (at 1 Million Cycles).
** See 315 bar pressure rating note on page 10.
SV08-24-04
SV - Solenoid Valves
SV - 139
Solenoid Valves Catalog
11141717 • Rev BB • May 2015
ORDERING INFORMATION
DIMENSIONS
EXAMPLE CIRCUITS
1
234
3/4-16 UNF-2A
24mm
35-40 Nm [26-30 lbf*ft]
COIL NOT SHOWN
FOR CLARITY
INSTALL O-RING (2) PLCS
AS SHOWN
20 mm
4-6 Nm
[35-53 lbf*in]
53.8
[2.12]
59.8
[2.35]
2.5
[0.1]
h
t
h
t
Ø23.8 [0.94]
Coil nut kit
P/N 17380058
Standard
(coil O-rings included)
SV08-24-04
4-Way, 2-Position Spool
Series/Parallel Uni-directional Motor ControlCreate a 4-Way 3-Position Valve Circuit
SV08-24-04
