SV - Solenoid Valves
SV - 130
Solenoid Valves Catalog
11141717 • Rev BB • May 2015
PERFORMANCE CURVES
APPLICATIONS
OPERATION
SPECIFICATIONS SCHEMATIC
Pressure drop
26 cSt [121 SUS] hyd.oil at 50°C [122 °F]
321
12963
0
300
10
0
20
0
psi
US gall/mi
n
bar
20
15
10
5
l/min
3 to 4 Energized
2 to 1 Energized
4
3
1
2
This is a direct-acting, 2-position, 4-way, 08-size spool-type solenoid
valve. When de-energized, the SV08-24-02 blocks ow to all ports. When
energized, the spool shifts to allow ow from port 3 to 4, and from port 2
to 1. Follow the “Operating Envelope” limits to ensure shifting of the valve
during operation.
Rated pressure* 230 bar [3300 psi]**
Rated ow at 7 bar
[100 psi]
10 l/min
[3 US gal/min]
Weight 0.31 kg [0.68 lb]
Cavity SDC08-4
Standard Coil M13 20 Watt
Robust Coil R13 16 Watt
Robust Nut P/N 173800539
(no coil O-rings needed)
SV08-24-02
4-Way, 2-Position Spool
SV08-24-02
These spool-type valves are primarily used in mobile and industrial
applications for controlling the direction of the ow in a circuit, like motors
or cylinders. Solenoid spool-type valves are direct acting and respond
quickly to coil voltage input. Spool valves will have some leakage due
to spool clearance, so if your application requires no leakage at the
working port(s), apply a low leakage poppet valve(s), like PO check valve,
counterbalance valve, etc., in addition to this solenoid valve.
This valve can operate with an inlet pressure of 315 bar on port 3 for
500,000 cycles. Port 1 may be pressurized to 210 bar, but is not intended
for use as inlet (Tank only).
Shown with Standard Coil,
Deutsch Connector
* Rated Pressure based on NFPA fatigue test standards (at 1 Million Cycles).
** See 315 bar pressure rating note on page 10.
SV - Solenoid Valves
SV - 131
Solenoid Valves Catalog
11141717 • Rev BB • May 2015
ORDERING INFORMATION
DIMENSIONS
EXAMPLE CIRCUITS
1
234
[2.35]
59.8
53.8
[2.12]
2.5
[0.1]
24 mm
35-40 Nm [26-30 lbf*ft]
3/4-16 UNF-2A
COIL NOT SHOWN
FOR CLARITY
INSTALL O-RING (2) PLCS
AS SHOWN
4-6 Nm
[35-53 lbf*in]
20 mm
h
t
h
t
Ø23.8 [0.94]
Coil nut kit
P/N 17380058
Standard
(coil O-rings included)
SV08-24-02
4-Way, 2-Position Spool
SV08-24-02
