SV - Solenoid Valves
SV - 120
Solenoid Valves Catalog
11141717 • Rev BB • May 2015
PERFORMANCE CURVES
APPLICATIONS
OPERATION
SPECIFICATIONS SCHEMATIC
33 cSt [154 SUS] hyd.oil @ 38°C [100°F]
Pressure drop
3.2
3.7 4.2 4.82.62.11.61.1
14104 18
0.5
161286
US gal/min
2
0
l/min
barpsi
116
16
0
8
12
0
4
58
20
232
174
290
3 to 2 to 4 to 1
De-Energized
3 to 4 to 2 to 1
Energized
406
348
28
24
4
3
1
2
Solenoid Valve, Spool Type, 2-Position, 4-Way, 08-size. When de-energized,
the SV08-24-01 allows ow from port 3 to port 2, and from port 4 to port
1. When energized, the spool shifts to allow ow from port 3 to port 4,
and from port 2 to port 1. Follow the “Operating Envelope” limits to ensure
shifting of the valve during operation.
Rated pressure* 230 bar [3300 psi]**
Rated ow at 7 bar
[100 psi]
8 l/min
[2 US gal/min]
Weight 0.32 kg [0.71 lb]
Cavity SDC08-4
Standard Coil M13 20 Watt
Robust Coil R13 16 Watt
Robust Nut P/N 173800539
(no coil O-rings needed)
SV08-24-01
SV08-24-01
4-Way, 2-Position Spool
These spool-type valves are primarily used in mobile and industrial applications
for controlling the direction of the ow in a circuit, like motors or cylinders. Can
be used in combination to duplicate a four-way, three-position valve, creating an
economical, compact function. Solenoid spool-type valves are direct acting and
respond quickly to coil voltage input. Spool valves will have some leakage due to
spool clearance, so if your application requires no leakage at the working port(s),
apply a low leakage poppet valve(s), like PO check valve, counterbalance valve,
etc., in addition to this solenoid valve. This valve can operate with an inlet pressure
of 315 bar on port 3 for 500,000 cycles. Port 1 may be pressurized to 210 bar, but
is not intended for use as inlet (Tank only).
* Rated Pressure based on NFPA fatigue test standards (at 1 Million Cycles).
** See 315 bar pressure rating note on page 10.
Shown with Standard Coil,
Deutsch Connector
SV - Solenoid Valves
SV - 121
Solenoid Valves Catalog
11141717 • Rev BB • May 2015
ORDERING INFORMATION
DIMENSIONS
EXAMPLE CIRCUITS
59.8 [2.35] 53.8 [2.12]
2.5 [0.10]
3/4-16 UNF-2A
20 mm
4-6 N·m
[35-53 lbf·in]
24 mm
35-40 N·m
[26-30 lbf·ft]
COIL NOT SHOWN FOR CLARITY
INSTALL O-RING (2) PLCS AS SHOWN
h
t
h
t
1
234
Ø23.8 [0.94]
Coil nut kit
P/N 17380058
Standard
(coil O-rings included)
SV08-24-01
4-Way, 2-Position Spool
SV08-24-01
