SV - Solenoid Valves
SV - 114
Solenoid Valves Catalog
11141717 • Rev BB • May 2015
PERFORMANCE CURVES
APPLICATIONS
OPERATION
SPECIFICATIONS SCHEMATIC
Pressure drop
26 cSt [121 SUS] hyd.oil at 50°C [122 °F]
0
321
12963
0
300
0
0
psi
US gall/mi
bar
20
15
10
5
l/min
3 to 2 De-energized
2 to 1 Energized
2
3
1
Solenoid Valve, Spool Type, 2-Position, 3-Way, 08 size. When de-energized, the
SV08-23-04 allows ow from port 3 to port 2, blocking port 1. When energized,
ports 2 and 1 are connected, blocking port 3. Follow the “Operating Envelope”
limits to ensure shifting of the valve during operation.
Rated pressure* 230 bar [3300 psi]**
Rated ow at 7 bar
[100 psi]
10 l/min
[3 US gal/min]
Weight 0.31 kg [0.68 lb]
Cavity SDC08-3
Standard Coil M13 20 Watt
Robust Coil R13 16 Watt
Robust Nut P/N 173800539
(no coil O-rings needed)
SV08-23-04
3-Way, 2-Position Spool
SV08-23-04
These spool-type valves are primarily used in mobile and industrial applications
for controlling the direction of the ow in a circuit like a single-acting cylinder,
clutch, brake, circuit selector valve, or pilot for a large directional spool valve.
Solenoid spool-type valves are direct acting and respond quickly to coil voltage
input. Spool valves will have some leakage due to spool clearance, so if your
application requires no leakage at the working port(s), apply a low leakage
poppet valve(s), like PO check valve, counterbalance valve, etc., in addition to
this solenoid valve. This valve can operate with an inlet pressure of 315 bar
for 400,000 cycles. In case of inlet from port 2 this value can be increased to
600,000 cycles.
* Rated Pressure based on NFPA fatigue test standards (at 1 Million Cycles).
** See 315 bar pressure rating note on page 10.
Shown with Standard Coil,
Deutsch Connector