SV - Solenoid Valves
SV - 86
Solenoid Valves Catalog
11141717 • Rev BB • May 2015
PERFORMANCE CURVES
APPLICATIONS
OPERATION
SPECIFICATIONS SCHEMATIC
Pressure drop
33 cSt [154 SUS] hyd.oil @ 38°C [100°F]
116
87
29
2
0
6
4
0
8
58
psi bar
l/min
0
2
US gal/min
0.5
4681012
1.1 1.5 2.1 2.63.2
14
3.7
Solenoid Valve, Spool Type, 2-Position, 2-Way, Normally Closed, Pull-Type.
When de-energized, the SV08-22-02 blocks ow in both directions. When
energized, the spool shifts to allow ow in both directions. Follow the
“Operating Envelope” limits to ensure shifting of the valve during operation.
Rated pressure* 230 bar [3300 psi]**
Rated ow at 7 bar
[100 psi]
14 l/min
[4 US gal/min]
Weight 0.29 kg [0.64 lb]
Cavity SDC08-2
Standard Coil M13 20 Watt
Robust Coil R13 16 Watt
Robust Nut P/N 173800539
(no coil O-rings needed)
SV08-22-02
2-Way Spool
These spool-type valves are primarily used in mobile and industrial
applications for blocking the ow of a 2-way function, pump unloading
or cylinder regeneration. Solenoid spool-type valves are direct acting and
respond quickly to coil voltage input. Spool valves will have some leakage
due to spool clearance, so if your application requires no leakage at the
working port(s), apply a low leakage poppet valve(s), like PO check valve,
counterbalance valve, etc., in addition to this solenoid valve. This valve can
operate with an inlet pressure of 315 bar for 400,000 cycles. In case of inlet
from port 2 this value can be increased to 600,000 cycles.
* Rated Pressure based on NFPA fatigue test standards (at 1 Million Cycles).
** See 315 bar pressure rating note on page 10.
Shown with Robust Coil,
Deutsch Connector
SV08-22-02