Proportional Valves
Proportional Valves Catalog
Proportional Valves
Proportional Valves Catalog
Proportional Directional
PSV10-34-05
PV - 20
11141718 • Rev AF • April 2015
DIMENSIONS
OPERATION
APPLICATIONS
SPECIFICATIONS
SCHEMATIC
PERFORMANCE CURVES
* Rated Pressure based on NFPA fatigue test standards (at 1 Million Cycles).
This is a proportional, non-compensated, 3 position 4 way,
directional ow control solenoid valve, with oat-center spool.
This is an electro-proportional directional control using a
3-Position, 4-Way design for directional control of hydraulic
cylinders and motors. For load-independent ow control, apply
with a pressure compensator, like CP700-4 (see Example Circuit).
Port 1 should be used as the tank port, with a maximum back-
pressure of 150 bar. The highest return ow coming from a
cylinder should be connected to Port 2.
Use the available Comatrol Adapter Block (SDC10-4-D03 or
SC10-4-D03-PC) to help test and replace proportional CETOP
D03 - available in compensated or non-compensated. Select
the robust coil for those extreme environmental conditions
- voltage extremes, high temperature, shock & vibration,
chemicals, and/or water ingression.
Note: For optimal performance install with the solenoid valve
below the tank oil level in the horizontal position, reducing the
chance for trapped air in the valve.
Rated Pressure* 250 bar [3600 psi]
Maximum Rated Flow at 7 bar
[100 psi]
22 l/min
[6 US gal/min]
Weight including coil 0.77 kg [1.7 lbs]
Hysteresis 4% maximum
Threshold current 0.5 A (12 VDC coil)
0.25 A (24 VDC coil)
Maximum control current 1.5 A (12 VDC coil)
0.8 A (24 VDC coil)
Cavity SDC10-4
Standard Coil M16 26 Watt
Robust Coil R16 20 Watt
Robust Nut P/N 173804910
(no coil O-rings needed)
PSV10-34-05
Shown with Robust CoilShown with DIN connector,
standard coil
3
4
1
2
S1
S2
Operating curves with M16 coil and plastic nut
Operating curves with R16 coil and steel nut