SPECIFICATIONS
VALVE CAVITY: #C1620, See Page 0-014.0.
VALVE CAVITY: #C1620, See Page 0-014.0.
4.65 lbs [2,10 kg] steel body.
4.65 lbs [2,10 kg] steel body.
1.25 lbs [0,57 kg] aluminum body.
1.25 lbs [0,57 kg] aluminum body.
1.09 lbs [0,50 kg] coil & housing.
1.09 lbs [0,50 kg] coil & housing.
WEIGHT: 0.95 lbs [0,42 kg] cartridge only.
WEIGHT: 0.95 lbs [0,42 kg] cartridge only.
SKV-1622 Viton
SEAL KIT: SKN-1622 Buna "N"
SEAL KIT: SKN-1622 Buna "N"
24 VDC, Operating current 0.2 to 1.2 AMPS.
24 VDC, Operating current 0.2 to 1.2 AMPS.
POWER REQUIREMENTS: 12 VDC, Operating current 0.4 to 2.4 AMPS.
POWER REQUIREMENTS: 12 VDC, Operating current 0.4 to 2.4 AMPS.
current control and a 50 Hz dither.
current control and a 50 Hz dither.
RESPONSE: The most efficient method to control this valve is with
RESPONSE: The most efficient method to control this valve is with
INTERNAL LEAKAGE: 40 cu.in/min [660 cc/m] @ 160 PSI DELTA P [11 Bar]
INTERNAL LEAKAGE: 40 cu.in/min [660 cc/m] @ 160 PSI DELTA P [11 Bar]
REGULATED FLOW: 36.0 GPM [136,0 l/m] Max. See performance chart.
REGULATED FLOW: 36.0 GPM [136,0 l/m] Max. See performance chart.
PROOF PRESSURE: 10,000 PSI [700 Bar]
PROOF PRESSURE: 10,000 PSI [700 Bar]
OPERATING PRESSURE: 5,000 PSI [350 Bar]
OPERATING PRESSURE: 5,000 PSI [350 Bar]
INSTALLATION: Flow 1-2 preferred, Max Flow 2-1 lower than shown on
INSTALLATION: Flow 1-2 preferred, Max Flow 2-1 lower than shown on
graph. Use undercuts in cavity to obtain max rated flow when using a
graph. Use undercuts in cavity to obtain max rated flow when using a
pressure compensator in series. Pressure drop across valve must not
pressure compensator in series. Pressure drop across valve must not
exceed 300 PSI [21] bar.
PROPORTIONAL, IN-LINE TYPE, FLOW CONTROL VALVE.
PROPORTIONAL, IN-LINE TYPE, FLOW CONTROL VALVE.
MIL-H-5606, SAE-#10, SAE-#20, etc.
MIL-H-5606, SAE-#10, SAE-#20, etc.
OPERATING MEDIA: All general purpose hydraulic fluids such as
OPERATING MEDIA: All general purpose hydraulic fluids such as
OPERATING TEMPERATURE: -40° to +250° F. [-40° to +120° C.]
OPERATING TEMPERATURE: -40° to +250° F. [-40° to +120° C.]
5000 PSI [350 Bar] = Steel - Unplated.
5000 PSI [350 Bar] = Steel - Unplated.
VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.
VALVE HOUSINGS: 2500 PSI [175 Bar] = Aluminum - Anodized.
info.el@bucherhydraulics.com www.bucherhydraulics.com/commoncavity
2015 by Bucher Hydraulics, Inc., 2545 Northwest Parkway, Elgin, Illinois 60124, USA
All rights reserved.
The technical information in this catalog, may contain calculated figures (for reference only) and not actual performance data for this product.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense.
The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to
continual improvement, we reserve the right to amend the product specifications contained in this catalogue.
©
Reference: 520-P-112040-EN-01/10.2019
PFCV-16